ALPHA MODEL RESIN • FORMLABS • REV1 TECH

Formlabs Alpha Model Resin Finest Detail, Deep Matte

The finest features and most matte finish of the Alpha Resins — for miniatures, busts and scale models.

Part 3D printed in Formlabs Alpha Model Resin

Formlabs Alpha Model Resin delivers a deep, fully matte, neutral surface on Form Studio 1 that captures every detail, down to the finest crevices and textures, and takes paint evenly. It resolves the finest features with dimensional accuracy for multi-part models that assemble precisely, at a 50 µm primary layer height. Thin features flex instead of snapping, so finished models survive painting, transport and drops. Full specifications →

50 µmLayer height
MatteTakes paint evenly
40 MPaTensile strength
24%Elongation
Category
General PurposeForm Studio 1

Genuine Formlabs Alpha Resin from an authorized US reseller. Call (248) 707-2950 for volume pricing.

Part 3D printed in Formlabs Alpha Model Resin
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Alpha Model Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Alpha Model Resin
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Alpha Model Resin

Detail that lasts.

Deep, Matte Finish
A fully matte, neutral surface that captures every detail and takes paint evenly.
Long-Lasting Models
Thin features flex instead of snapping, so models survive painting, transport and drops.
UL GREENGUARD Gold
Alpha Resins are the first resin printing materials certified UL GREENGUARD Gold for low VOC emissions — when printed on Form Studio 1 with the VOC Extractor.
Skin-Safe Parts
Post-processed parts meet requirements for long-term (>30 day) skin contact in accordance with ISO 10993.
Features

Applications and properties.

Warrior figurine printed in Alpha Model Resin

Figurines

Sculptures, busts and figurines with exceptional detail and contrast.

Figurines
Creature sculpture printed in Alpha Model Resin

Intricate sculptures

Captures every detail down to the finest crevices and textures.

Fine detail
Samurai bust printed in Alpha Model Resin

Busts that take paint

A neutral matte surface that takes paint evenly.

Paint-ready
Hands holding miniatures printed in Alpha Model Resin

Miniatures built to last

Thin features flex instead of snapping during painting and handling.

Miniatures
Works With

Printers and post-processing.

Wash and post-cure to reach the published properties.

Formlabs Form Studio 1 resin 3D printer
Form Studio 1
The 1 L cartridge loads straight in. View Form Studio 1 →
Formlabs Form Studio Wash+Cure
Form Studio Wash+Cure
Room-temperature post-cure in 5 minutes. View Wash+Cure →
Formlabs VOC Extractor for Form Studio 1
VOC Extractor
Required for the UL GREENGUARD Gold rating. See Form Studio 1 →
In the Box

Available size:

Add to cart in the buy box above.

1 L cartridge — Form Studio 1Loads straight into Form Studio 1
Compare

Formlabs Alpha Resins compared.

From Formlabs’ published tech specs (post-cured 5 minutes at room temperature in Form Studio Wash+Cure).

PropertyAlpha FastAlpha GreyAlpha BlackAlpha WhiteAlpha ClearAlpha Model
Best forFastest printingSpeed + aestheticsSpeed + aestheticsSpeed + aestheticsSpeed + clarityFinest detail, most matte
Average print speed90 mm/h40 mm/h40 mm/h40 mm/h40 mm/h13 mm/h
Primary layer height150 µm100 µm100 µm100 µm100 µm50 µm
Tensile strength46 MPa43 MPa42 MPa35 MPa38 MPa40 MPa
Elongation at break34%34%36%26%32%24%
1 L price$29$36$36$36$36$42

Browse all Formlabs resins or the Formlabs brand page.

Specifications

Formlabs Alpha Model Resin Technical Data

Compatible Printer
Form Studio 1
Compatible Tank
Form Studio Resin Tank
Print Technology
SLA
Category
General Purpose
Key Characteristic
Best fine features, most matte finish
Primary Layer Height
50 µm
Average Print Speed
13 mm/h
Size
1 L cartridge — Form Studio 1
Ultimate Tensile Strength
40 MPa
Tensile Modulus
1,980 MPa
Flexural Strength / Modulus
57 MPa / 1,660 MPa
Notched Izod
35 J/m
Elongation at Break
24%
Heat Deflection Temp. @ 0.45 MPa
49 °C
Post-Cure Basis
5 minutes at room temperature, Form Studio Wash+Cure
SKU
RS-C2-APMD-01 (1 L)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Alpha Model Resin with confidence.

Alpha Model Resin Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
Resin Print & Post-Processing Guide
Formlabs-recommended wash and post-cure settings and handling for this resin.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs resin for your parts and set up wash and cure.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs resins, tanks, build platforms, and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Alpha Model Resin — questions buyers ask.

Why is it slower?
It prints at a 50 µm layer height (average 13 mm/h) to resolve the finest features and most matte finish of the Alpha family.
Is it safe to print at home or in the office?
Alpha Resins use low-odor components, the liquid resin scored as non-skin-irritant under OECD 439, and printing on Form Studio 1 with the VOC Extractor is certified UL GREENGUARD Gold for low VOC emissions.
What post-processing does it need?
Wash and post-cure in Form Studio Wash+Cure. Formlabs’ published properties use a 5-minute post-cure at room temperature.
Which printers can use it?
Form Studio 1 only, with the Form Studio Resin Tank. For Form 4-series printers, see the Formlabs V5 resins.
How do the Alpha Resins differ?
Alpha Fast prints fastest (average 90 mm/h at 150 µm); Grey, Black, White and Clear balance speed and aesthetics at 40 mm/h and 100 µm; Alpha Model gives the finest detail and most matte finish at 50 µm.
What is it used for?
Formlabs lists it for sculptures, busts and figurines; intricate models that take paint evenly; miniatures and terrain pieces; scale models with life-like detail.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Alpha Model Resin

Order Alpha Model Resin for your Form Studio 1, or talk to a Rev1 specialist about the right Alpha Resin for your parts.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.