Formlabs Alpha Fast Resin Blazing-Fast Prototyping
Average 90 mm/h on Form Studio 1 — small parts in minutes, the whole build volume in under two hours.
Formlabs Alpha Fast Resin is the fastest-printing Alpha Resin for Form Studio 1, averaging 90 mm/h at a 150 µm layer height, with print speeds up to 130 mm/h per Formlabs — small components in minutes or the entire build volume in less than two hours. Print settings are rigorously tested so speed doesn’t cost print success, and parts exceed the strength and toughness of ABS-like resins and ABS filaments with 46 MPa tensile strength and 34% elongation at break. Full specifications →
Genuine Formlabs Alpha Resin from an authorized US reseller. Call (248) 707-2950 for volume pricing.

Factory-Built Precision. US-Supported by Rev1.
Alpha Fast Resin is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Iterate in minutes.
Applications and properties.
Rapid iteration
Refine form, fit and function with prints that come off in minutes.
Organizers that print in minutes
Jigs, fixtures and organizers for the workshop or studio.
Shape-and-feel prototypes
Initial prototypes to check shape and feel before committing to a design.
Large parts in under two hours
Fill the build volume and still print in under two hours.
Printers and post-processing.
Wash and post-cure to reach the published properties.



Available size:
Add to cart in the buy box above.
Formlabs Alpha Resins compared.
From Formlabs’ published tech specs (post-cured 5 minutes at room temperature in Form Studio Wash+Cure).
| Property | Alpha Fast | Alpha Grey | Alpha Black | Alpha White | Alpha Clear | Alpha Model |
|---|---|---|---|---|---|---|
| Best for | Fastest printing | Speed + aesthetics | Speed + aesthetics | Speed + aesthetics | Speed + clarity | Finest detail, most matte |
| Average print speed | 90 mm/h | 40 mm/h | 40 mm/h | 40 mm/h | 40 mm/h | 13 mm/h |
| Primary layer height | 150 µm | 100 µm | 100 µm | 100 µm | 100 µm | 50 µm |
| Tensile strength | 46 MPa | 43 MPa | 42 MPa | 35 MPa | 38 MPa | 40 MPa |
| Elongation at break | 34% | 34% | 36% | 26% | 32% | 24% |
| 1 L price | $29 | $36 | $36 | $36 | $36 | $42 |
Browse all Formlabs resins or the Formlabs brand page.
Formlabs Alpha Fast Resin Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Alpha Fast Resin with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.