ELASTOMERIC SLS POWDER • FORMLABS • REV1 TECH

Formlabs TPU 90A Powder Tough, Flexible, Skin-Safe

A tough 90A elastomer with high elongation and tear strength for flexible end-use parts.

Part 3D printed in Formlabs TPU 90A Powder

Formlabs TPU 90A Powder is a tough elastomer with high elongation at break and superior tear strength for flexible, resilient, skin-safe prototypes and end-use parts that withstand everyday use. A low 20% refresh rate lets you print with 80% recycled powder for minimal waste, and the accessible Fuse system enables a low cost per part for low-to-medium volume production. Ideal for wearables, custom medical appliances, orthotics and prosthetics. For Fuse 1+ 30W and Fuse 1. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →

90AShore hardness
310%Elongation (X/Y)
39 kN/mTear strength
10 kgBag
Category
ElastomericTemperature ResistantGrey

Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Part 3D printed in Formlabs TPU 90A Powder
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

TPU 90A Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of TPU 90A Powder
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose TPU 90A Powder

Flexible parts that last.

Tough and Flexible
High tear strength and elongation for durable elastomeric parts.
High ROI
A low cost per part for low-to-medium volume production.
Skin Safe
Custom medical appliances and wearable accessories.
Low Waste
A 20% refresh rate — print with 80% recycled powder.
Features

Applications and properties.

Hands flexing a part printed in TPU 90A Powder

Wearables and soft-touch parts

Soft, strong parts that are durable and safe to wear.

Wearables
Splints, masks and medical devices printed in TPU 90A Powder

Orthotics and prosthetics

Patient-specific devices with comfort and performance.

Medical
Bellows printed in TPU 90A Powder

Gaskets, seals and tubing

Flexibility, durability and abrasion resistance for parts that seal under repeated movement.

Seals
Helmet with padding printed in TPU 90A Powder

Padding and dampers

Cushioning and damping elements for everyday use.

Padding
Works With

Printers and post-processing.

Print on the Fuse Series, then recover powder and clean parts.

Formlabs Fuse 1+ 30W SLS 3D printer
Fuse 1+ 30W
Compact SLS printer. View Fuse 1+ 30W →
Formlabs Fuse Sift powder recovery station
Fuse Sift
Recover, mix and dispense powder. View Fuse Sift →
Formlabs Fuse Blast cleaning and polishing station
Fuse Blast
Automated cleaning and polishing. View Fuse Blast →
In the Box

Available size:

Add to cart in the buy box above.

10 kg bagBulk: from 20% off at 50 kg
Compare

Formlabs Nylon 11 and TPU powders compared.

From Formlabs’ published tech specs (X/Y unless noted).

PropertyNylon 11Nylon 11 ProNylon 11 CFTPU 90A
Best forDuctile, impact-resistant partsToughest nylon, thin featuresStiff, strong, lightweight compositesFlexible, skin-safe elastomer
Tensile strength49 MPa46 MPa69 MPa (X)8.7 MPa
Elongation at break40%49%9% (X)310%
Notched Izod / hardness71 J/m50 J/m74 J/mShore 90A
PrintersFuse 1+ 30W, Fuse 1Fuse 1+ 30WFuse 1+ 30WFuse 1+ 30W, Fuse 1
Bag6 kg · $69910 kg · $1,10010 kg · $1,64910 kg · $1,299

Browse all Formlabs SLS powders or the Formlabs brand page.

Specifications

Formlabs TPU 90A Powder Technical Data

Compatible Printers
Fuse 1+ 30W, Fuse 1
Print Technology
SLS
Color
Grey
Biocompatibility
Skin contact, mucosal membrane contact
Refresh Rate
20% (80% recycled powder)
Size
10 kg bag
Ultimate Tensile Strength
8.7 MPa (X/Y), 7.2 MPa (Z)
Stress at 100% Elongation
7 MPa
Elongation at Break
310% (X/Y), 110% (Z)
Shore Hardness
90A
Tear Strength
39 kN/m
Compression Set (70 °C, 22 h)
60%
SKU
PD-FS-TP9G-10-01 (10 kg bag)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs TPU 90A Powder with confidence.

TPU 90A Powder Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
SLS Powder & Post-Processing Guide
Formlabs-recommended powder handling, refresh rates, and Fuse Sift and Fuse Blast post-processing.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs SLS powder for your parts and set up powder recovery and post-processing.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for SLS powder guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs SLS powders, Fuse consumables and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs TPU 90A Powder — questions buyers ask.

How flexible is it?
Shore 90A with 310% elongation at break (X/Y) and 39 kN/m tear strength.
Is it skin-safe?
Formlabs lists skin and mucosal membrane contact, suiting wearables and medical appliances.
Which printers can use it?
Fuse 1+ 30W and Fuse 1.
What size is it?
A 10 kg bag.
Are there volume discounts?
Yes. Formlabs SLS powder discounts start at 20% for 50 kg bought in bulk, with prices as low as $45 per kilogram at volume. Ask Rev1 for bulk pricing.
What is it used for?
Formlabs recommends it for wearables and soft-touch elements; soles, splints, orthotics and prosthetics; gaskets, seals, masks, belts and tubing; padding, dampers and cushions.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs TPU 90A Powder

Order TPU 90A Powder, or talk to a Rev1 specialist about the right SLS powder and bulk pricing for your Fuse printer.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.