Formlabs Nylon 12 White Powder Crisp White, Dyeable
All the benefits of Nylon 12 Powder in white — high-contrast parts you can dye to match your brand.
Formlabs Nylon 12 White Powder gives you the benefits of general-purpose Nylon 12 with the customizability of white SLS parts. Crisp, clean white suits high-contrast parts, and parts dye easily to a wide range of colors to match brand aesthetics. A coarser surface appearance is forgiving of scratches and wear for a long-lasting look. White is the industry standard for medical devices and guides, and samples have been evaluated for biocompatibility under ISO standards (see the TDS). For the Fuse 1+ 30W. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →
Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Nylon 12 White Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

White parts, your colors.
Applications and properties.
Low-volume end-use parts
Formlabs compares MJF white powder (left), Nylon 12 White Powder (middle) and EOS SLS white powder (right).
Branded, looks-like prototypes
Dye parts to custom colors that match brand aesthetics.
Medical devices and models
White is the industry standard for medical devices and guides; samples were evaluated for biocompatibility under ISO standards.
Fixtures, tools and jigs
Strong, chemically resistant white parts for the shop floor.
Printers and post-processing.
Print on the Fuse Series, then recover powder and clean parts.



Available size:
Add to cart in the buy box above.
Formlabs Nylon 12 powders compared.
From Formlabs’ published tech specs (X/Y unless noted).
| Property | Nylon 12 | Nylon 12 White | Nylon 12 Tough | Nylon 12 GF |
|---|---|---|---|---|
| Best for | General purpose | White, dyeable parts | Ductile, low-warp parts | Stiff, heat-resistant parts |
| Tensile strength | 50 MPa | 47 MPa | 42 MPa | 38 MPa |
| Tensile modulus | 1,900 MPa | 1,950 MPa | 1,450 MPa | 2,800 MPa |
| Elongation at break | 8% | 8% | 25% | 4% |
| HDT @ 0.45 MPa | 171 °C | 177 °C | 161 °C | 170 °C |
| Printers | Fuse X1, Fuse 1+ 30W, Fuse 1 | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W, Fuse 1 |
| Bag | 10 kg · $999 | 10 kg · $1,099 | 10 kg · $1,099 | 6 kg · $649 |
Browse all Formlabs SLS powders or the Formlabs brand page.
Formlabs Nylon 12 White Powder Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Nylon 12 White Powder with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.