DUCTILE SLS POWDER • FORMLABS • REV1 TECH

Formlabs Nylon 12 Tough Powder Tough, Ductile, Low-Warp

Over 50% more ductile than Nylon 12, with the best refresh rate of the Formlabs nylons.

Part 3D printed in Formlabs Nylon 12 Tough Powder

Formlabs Nylon 12 Tough Powder produces highly ductile, dimensionally accurate parts on the Fuse 1+ 30W, with reduced warpage across the build chamber. It is over 50% more ductile than Nylon 12 Powder for less brittle parts, and offers a best-in-class refresh rate: up to 80% reused powder per build, the best sustainability and affordability among Formlabs nylon powders. Nylon 12 Tough Powder requires powder aging before the first print. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →

25%Elongation (X/Y)
80%Reused powder
60 J/mNotched Izod
10 kgBag
Category
Impact ResistantGrey

Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Part 3D printed in Formlabs Nylon 12 Tough Powder
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Nylon 12 Tough Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Nylon 12 Tough Powder
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Nylon 12 Tough Powder

Ductile parts with less waste.

Best-in-Class Refresh Rate
Up to 80% reused powder per build.
High Ductility
Over 50% more ductile than Nylon 12 Powder.
Dimensional Accuracy
Reduced warpage across the build chamber.
Accessibility
A 20% refresh rate uses all your unsintered powder for a lower cost per part.
Features

Applications and properties.

Drone frame and parts printed in Nylon 12 Tough Powder

Impact-resistant end-use parts

High-performance parts that take impacts.

End-use parts
Bracket printed in Nylon 12 Tough Powder

Snaps, ratchets and hinges

Ductile parts that are less brittle than standard Nylon 12.

Ductile
Long, thin combs printed in Nylon 12 Tough Powder

Long parts that resist warping

Reduced warpage across the build chamber for long, flat geometry.

Low warp
Nylon 12 Tough Powder sample parts

Compliant mechanisms

Ductility for mechanisms that flex as designed.

Compliant
Works With

Printers and post-processing.

Print on the Fuse Series, then recover powder and clean parts.

Formlabs Fuse 1+ 30W SLS 3D printer
Fuse 1+ 30W
Compact SLS printer. View Fuse 1+ 30W →
Formlabs Fuse Sift powder recovery station
Fuse Sift
Recover, mix and dispense powder. View Fuse Sift →
Formlabs Fuse Blast cleaning and polishing station
Fuse Blast
Automated cleaning and polishing. View Fuse Blast →
In the Box

Available size:

Add to cart in the buy box above.

10 kg bagBulk: from 20% off at 50 kg
Compare

Formlabs Nylon 12 powders compared.

From Formlabs’ published tech specs (X/Y unless noted).

PropertyNylon 12Nylon 12 WhiteNylon 12 ToughNylon 12 GF
Best forGeneral purposeWhite, dyeable partsDuctile, low-warp partsStiff, heat-resistant parts
Tensile strength50 MPa47 MPa42 MPa38 MPa
Tensile modulus1,900 MPa1,950 MPa1,450 MPa2,800 MPa
Elongation at break8%8%25%4%
HDT @ 0.45 MPa171 °C177 °C161 °C170 °C
PrintersFuse X1, Fuse 1+ 30W, Fuse 1Fuse 1+ 30WFuse 1+ 30WFuse 1+ 30W, Fuse 1
Bag10 kg · $99910 kg · $1,09910 kg · $1,0996 kg · $649

Browse all Formlabs SLS powders or the Formlabs brand page.

Specifications

Formlabs Nylon 12 Tough Powder Technical Data

Compatible Printer
Fuse 1+ 30W
Print Technology
SLS
Color
Grey
Biocompatibility
Skin contact, mucosal membrane contact
Refresh
Up to 80% reused powder (20% refresh)
First Use
Requires powder aging before the first print
Size
10 kg bag
Ultimate Tensile Strength
42 MPa
Tensile Modulus
1,450 MPa
Flexural Strength / Modulus
42 MPa / 1,100 MPa
Notched Izod
60 J/m
Elongation at Break
25% (X/Y), 15% (Z)
Heat Deflection Temp. @ 1.8 / 0.45 MPa
46 °C / 161 °C
SKU
PD-FS-P12T-10-01 (10 kg bag)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Nylon 12 Tough Powder with confidence.

Nylon 12 Tough Powder Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
SLS Powder & Post-Processing Guide
Formlabs-recommended powder handling, refresh rates, and Fuse Sift and Fuse Blast post-processing.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs SLS powder for your parts and set up powder recovery and post-processing.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for SLS powder guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs SLS powders, Fuse consumables and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Nylon 12 Tough Powder — questions buyers ask.

How is it different from Nylon 12?
Over 50% more ductile, with reduced warpage and up to 80% reused powder per build.
Does it need preparation?
Yes — Formlabs says it requires powder aging before starting the first print.
Which printers can use it?
Fuse 1+ 30W.
What size is it?
A 10 kg bag.
Are there volume discounts?
Yes. Formlabs SLS powder discounts start at 20% for 50 kg bought in bulk, with prices as low as $45 per kilogram at volume. Ask Rev1 for bulk pricing.
What is it used for?
Formlabs recommends it for high-performance, impact-resistant prototypes and end-use parts; parts requiring ductility: snaps, ratchets, hinges; long parts susceptible to warping; compliant mechanisms.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Nylon 12 Tough Powder

Order Nylon 12 Tough Powder, or talk to a Rev1 specialist about the right SLS powder and bulk pricing for your Fuse printer.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.