Formlabs Nylon 12 Powder The Versatile SLS Nylon
Strong, environmentally stable parts and complex assemblies — for Fuse X1, Fuse 1+ 30W and Fuse 1.
Formlabs Nylon 12 Powder is a highly capable thermoplastic for functional prototyping and end-use production. With high tensile strength and environmental stability, it creates complex assemblies and durable parts with minimal water absorption, printing highly detailed parts with low creep. Print with up to 70% recycled powder for an economical refresh rate, and parts resist light, heat and chemicals. It is biocompatible (skin and mucosal membrane contact), suiting orthotics and prosthetics. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →
Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Nylon 12 Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Prototypes to production.
Applications and properties.
High-performance prototyping
REEKON Tools printed a durable prototype of its measuring tool and avoided injection molding seven different parts.
Permanent jigs and tooling
Eaton replaced electrical tester cups previously machined from Delrin (POM) with Nylon 12 Powder.
Low-volume manufacturing
Mosolf uses Nylon 12 Powder for end-use parts in police vans and other special and emergency vehicles.
Strong, stable parts
Durable parts with minimal water absorption and resistance to light, heat and chemicals.
Printers and post-processing.
Print on the Fuse Series, then recover powder and clean parts.



Available size:
Add to cart in the buy box above.
Formlabs Nylon 12 powders compared.
From Formlabs’ published tech specs (X/Y unless noted).
| Property | Nylon 12 | Nylon 12 White | Nylon 12 Tough | Nylon 12 GF |
|---|---|---|---|---|
| Best for | General purpose | White, dyeable parts | Ductile, low-warp parts | Stiff, heat-resistant parts |
| Tensile strength | 50 MPa | 47 MPa | 42 MPa | 38 MPa |
| Tensile modulus | 1,900 MPa | 1,950 MPa | 1,450 MPa | 2,800 MPa |
| Elongation at break | 8% | 8% | 25% | 4% |
| HDT @ 0.45 MPa | 171 °C | 177 °C | 161 °C | 170 °C |
| Printers | Fuse X1, Fuse 1+ 30W, Fuse 1 | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W, Fuse 1 |
| Bag | 10 kg · $999 | 10 kg · $1,099 | 10 kg · $1,099 | 6 kg · $649 |
Browse all Formlabs SLS powders or the Formlabs brand page.
Formlabs Nylon 12 Powder Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Nylon 12 Powder with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.