Formlabs Nylon 12 GF Powder Stiff and Heat-Stable
Glass-filled Nylon 12 for high stiffness, sustained loading and dimensional stability at temperature.
Formlabs Nylon 12 GF Powder is a glass-filled material for high-performance functional prototypes and robust end-use parts that must maintain dimensional accuracy. Its high modulus and thermal stability suit parts under sustained loading and elevated temperatures, with low warpage and minimal moisture absorption, and resistance to light, heat and chemicals. It prints high-tolerance threads, sockets and moving elements within the part. For Fuse 1+ 30W and Fuse 1. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →
Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Nylon 12 GF Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Stiffness that holds up.
Applications and properties.
Sustained loading
High stiffness and thermal stability for automotive and aerospace parts.
Small-batch enclosures
High-tolerance threads, sockets and moving elements printed in place.
High-temperature parts
An EV connector printed in Nylon 12 GF Powder on the Fuse Series.
Jigs, fixtures and replacement parts
Robust parts for demanding end-use applications.
Printers and post-processing.
Print on the Fuse Series, then recover powder and clean parts.



Available size:
Add to cart in the buy box above.
Formlabs Nylon 12 powders compared.
From Formlabs’ published tech specs (X/Y unless noted).
| Property | Nylon 12 | Nylon 12 White | Nylon 12 Tough | Nylon 12 GF |
|---|---|---|---|---|
| Best for | General purpose | White, dyeable parts | Ductile, low-warp parts | Stiff, heat-resistant parts |
| Tensile strength | 50 MPa | 47 MPa | 42 MPa | 38 MPa |
| Tensile modulus | 1,900 MPa | 1,950 MPa | 1,450 MPa | 2,800 MPa |
| Elongation at break | 8% | 8% | 25% | 4% |
| HDT @ 0.45 MPa | 171 °C | 177 °C | 161 °C | 170 °C |
| Printers | Fuse X1, Fuse 1+ 30W, Fuse 1 | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W, Fuse 1 |
| Bag | 10 kg · $999 | 10 kg · $1,099 | 10 kg · $1,099 | 6 kg · $649 |
Browse all Formlabs SLS powders or the Formlabs brand page.
Formlabs Nylon 12 GF Powder Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Nylon 12 GF Powder with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.