Formlabs Nylon 11 Pro Powder Injection-Molded Toughness
The toughness of injection-molded engineering thermoplastics with the printability of Nylon 12.
Formlabs Nylon 11 Pro Powder is the first SLS material that combines the toughness and durability of injection-molded thermoplastics with the ease of use and consistent print performance of Nylon 12. Compared with Nylon 12 it delivers five times the elongation at break, twice the impact resistance and ten times the toughness in fine, thin features — with the same 30% refresh rate and print success rate. Ideal for impact-resistant housings, snap fits and living hinges, thin-walled ducts and enclosures, orthotics, prosthetics and wearables. For the Fuse 1+ 30W. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →
Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Factory-Built Precision. US-Supported by Rev1.
Nylon 11 Pro Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Toughness without trade-offs.
Applications and properties.
Snaps, clips and living hinges
Fine features that survive depowdering, handling and automated post-processing.
Thin-walled parts
Formlabs’ fixed-wing drone airframe is just 0.5 mm thick — light enough to fly, tough enough to land hard.
Production tooling
Tough jigs and tooling that take repeated handling.
Orthotics and wearables
Devices worn every day that move, flex and take hits.
Printers and post-processing.
Print on the Fuse Series, then recover powder and clean parts.



Available size:
Add to cart in the buy box above.
Formlabs Nylon 11 and TPU powders compared.
From Formlabs’ published tech specs (X/Y unless noted).
| Property | Nylon 11 | Nylon 11 Pro | Nylon 11 CF | TPU 90A |
|---|---|---|---|---|
| Best for | Ductile, impact-resistant parts | Toughest nylon, thin features | Stiff, strong, lightweight composites | Flexible, skin-safe elastomer |
| Tensile strength | 49 MPa | 46 MPa | 69 MPa (X) | 8.7 MPa |
| Elongation at break | 40% | 49% | 9% (X) | 310% |
| Notched Izod / hardness | 71 J/m | 50 J/m | 74 J/m | Shore 90A |
| Printers | Fuse 1+ 30W, Fuse 1 | Fuse 1+ 30W | Fuse 1+ 30W | Fuse 1+ 30W, Fuse 1 |
| Bag | 6 kg · $699 | 10 kg · $1,100 | 10 kg · $1,649 | 10 kg · $1,299 |
Browse all Formlabs SLS powders or the Formlabs brand page.
Formlabs Nylon 11 Pro Powder Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to choose and run Formlabs Nylon 11 Pro Powder with confidence.
WHY REV1 TECH
Authorized Formlabs Reseller. Resin & SLS Production Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.