DUCTILE SLS POWDER • FORMLABS • REV1 TECH

Formlabs Nylon 11 Powder Ductile, Strong, Flexible

Nylon 11 for parts that handle wear and tear — thin walls, snaps, hinges and orthotics.

Part 3D printed in Formlabs Nylon 11 Powder

Formlabs Nylon 11 Powder is a ductile, strong, flexible material for when durability and performance are key. Parts handle wear and tear over time, print thin-walled enclosures and ducts with ease, and absorb very little moisture while resisting light, heat and chemicals. Sintered nylon bends and returns to its original form rather than fracturing suddenly. For Fuse 1+ 30W and Fuse 1; Formlabs also offers Nylon 11 Pro Powder for even higher toughness. As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →

40%Elongation
71 J/mNotched Izod
182 °CHDT @ 0.45 MPa
6 kgBag
Category
Impact ResistantTemperature Resistant

Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Part 3D printed in Formlabs Nylon 11 Powder
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Nylon 11 Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Nylon 11 Powder
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Nylon 11 Powder

Durability where it counts.

High Ductility
End-use parts that handle wear and tear over time.
Thin Walls
Enclosures, ducts and thin geometries with ease.
Seamless Workflow
Print Nylon 11 in-house on the Fuse Series.
Environmental Stability
Absorbs very little moisture; resists light, heat and chemicals.
Features

Applications and properties.

Headphones with housings and headband printed in Nylon 11 Powder

Thin-walled enclosures

These headphones’ housings, speaker shells and headband were printed in Nylon 11 Powder.

Thin walls
Buckle printed in Nylon 11 Powder

Snaps, clips and hinges

Strong, flexible, lightweight and stable — suited to high-performance sporting equipment.

Snap fits
Insoles printed in Nylon 11 Powder

Orthotics and prosthetics

Lightweight strength, flexibility and fatigue resistance for insoles and orthotics.

Orthotics
Nylon 11 Powder sample parts

Impact-resistant jigs and fixtures

Rugged prototypes and end-use parts that take an impact and keep going.

Rugged
Works With

Printers and post-processing.

Print on the Fuse Series, then recover powder and clean parts.

Formlabs Fuse 1+ 30W SLS 3D printer
Fuse 1+ 30W
Compact SLS printer. View Fuse 1+ 30W →
Formlabs Fuse Sift powder recovery station
Fuse Sift
Recover, mix and dispense powder. View Fuse Sift →
Formlabs Fuse Blast cleaning and polishing station
Fuse Blast
Automated cleaning and polishing. View Fuse Blast →
In the Box

Available size:

Add to cart in the buy box above.

6 kg bagBulk: from 20% off at 50 kg
Compare

Formlabs Nylon 11 and TPU powders compared.

From Formlabs’ published tech specs (X/Y unless noted).

PropertyNylon 11Nylon 11 ProNylon 11 CFTPU 90A
Best forDuctile, impact-resistant partsToughest nylon, thin featuresStiff, strong, lightweight compositesFlexible, skin-safe elastomer
Tensile strength49 MPa46 MPa69 MPa (X)8.7 MPa
Elongation at break40%49%9% (X)310%
Notched Izod / hardness71 J/m50 J/m74 J/mShore 90A
PrintersFuse 1+ 30W, Fuse 1Fuse 1+ 30WFuse 1+ 30WFuse 1+ 30W, Fuse 1
Bag6 kg · $69910 kg · $1,10010 kg · $1,64910 kg · $1,299

Browse all Formlabs SLS powders or the Formlabs brand page.

Specifications

Formlabs Nylon 11 Powder Technical Data

Compatible Printers
Fuse 1+ 30W, Fuse 1
Print Technology
SLS
Biocompatibility
Skin contact, mucosal membrane contact
Category
Impact Resistant, Temperature Resistant, Medical
Size
6 kg bag
Ultimate Tensile Strength
49 MPa
Tensile Modulus
1,600 MPa
Flexural Strength / Modulus
55 MPa / 1,400 MPa
Notched Izod
71 J/m
Elongation at Break
40%
Heat Deflection Temp. @ 1.8 / 0.45 MPa
46 °C / 182 °C
SKU
PD-FS-P11B-01 (6 kg bag)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Nylon 11 Powder with confidence.

Nylon 11 Powder Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
SLS Powder & Post-Processing Guide
Formlabs-recommended powder handling, refresh rates, and Fuse Sift and Fuse Blast post-processing.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs SLS powder for your parts and set up powder recovery and post-processing.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for SLS powder guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs SLS powders, Fuse consumables and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Nylon 11 Powder — questions buyers ask.

Nylon 11 or Nylon 11 Pro?
Nylon 11 Pro adds the toughness of injection-molded thermoplastics with Nylon 12-like printability; Nylon 11 is the ductile original.
Which printers can use it?
Fuse 1+ 30W and Fuse 1.
Is it good for orthotics?
Formlabs recommends it for orthotics and prosthetics such as insoles.
What size is it?
A 6 kg bag.
Are there volume discounts?
Yes. Formlabs SLS powder discounts start at 20% for 50 kg bought in bulk, with prices as low as $45 per kilogram at volume. Ask Rev1 for bulk pricing.
What is it used for?
Formlabs recommends it for impact-resistant prototypes, jigs and fixtures; thin-walled ducts and enclosures; snaps, clips and hinges; orthotics and prosthetics.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Nylon 11 Powder

Order Nylon 11 Powder, or talk to a Rev1 specialist about the right SLS powder and bulk pricing for your Fuse printer.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.