CARBON FIBER SLS POWDER • FORMLABS • REV1 TECH

Formlabs Nylon 11 CF Powder Stiff, Strong, Lightweight

Carbon fiber-filled Nylon 11 — the highest-performance material for the Fuse 1+ 30W.

Part 3D printed in Formlabs Nylon 11 CF Powder

Formlabs Nylon 11 CF Powder is a carbon fiber-filled material for applications that need both superior stiffness and strength. Produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact, with the rigidity of carbon fibers and the ductility of Nylon 11. Formlabs calls it its highest-performance material for the Fuse 1+ 30W. Note that properties are anisotropic (X / Y / Z values differ). As Formlabs notes, material properties vary with part design and manufacturing practices, and it is the manufacturer’s responsibility to validate printed parts for the intended use. Full specifications →

69 MPaTensile strength (X)
5,300 MPaTensile modulus (X)
188 °CHDT @ 0.45 MPa
10 kgBag
Category
High StiffnessImpact ResistantTemperature Resistant

Genuine Formlabs SLS powder from an authorized US reseller — bulk discounts from 20% at 50 kg. Call (248) 707-2950.

Part 3D printed in Formlabs Nylon 11 CF Powder
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Nylon 11 CF Powder is built and supported by Formlabs. Rev1 adds workflow and material guidance, onboarding, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Workflow & Material Guidance US Stock, Parts & Training
Formlabs — official manufacturer of Nylon 11 CF Powder
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose Nylon 11 CF Powder

Composite performance.

Carbon Fiber-Filled
High-performance composite parts for strenuous end-use applications.
Stiff and Strong
The rigidity of carbon fibers with the ductility of Nylon 11.
Lightweight
A high strength-to-weight ratio with the geometric freedom of 3D printing.
High Thermal Stability
Heat-resistant parts that hold accuracy and take repeated impact.
Features

Applications and properties.

Intake manifold printed in Nylon 11 CF Powder

Alternatives to metal parts

Stiff, strong replacement and spare parts.

Metal replacement
Snowboard bindings printed in Nylon 11 CF Powder

High-impact equipment

Lightweight, rigid parts that sustain repeated impact.

Sporting goods
Nylon 11 CF parts before and after vibratory finishing

Tooling, jigs and fixtures

Heat-resistant tooling that keeps its accuracy over time.

Tooling
Bike brake lever printed in Nylon 11 CF Powder

Functional composite prototypes

Validate composite designs with functional prototypes.

Prototypes
Works With

Printers and post-processing.

Print on the Fuse Series, then recover powder and clean parts.

Formlabs Fuse 1+ 30W SLS 3D printer
Fuse 1+ 30W
Compact SLS printer. View Fuse 1+ 30W →
Formlabs Fuse Sift powder recovery station
Fuse Sift
Recover, mix and dispense powder. View Fuse Sift →
Formlabs Fuse Blast cleaning and polishing station
Fuse Blast
Automated cleaning and polishing. View Fuse Blast →
In the Box

Available size:

Add to cart in the buy box above.

10 kg bagBulk: from 20% off at 50 kg
Compare

Formlabs Nylon 11 and TPU powders compared.

From Formlabs’ published tech specs (X/Y unless noted).

PropertyNylon 11Nylon 11 ProNylon 11 CFTPU 90A
Best forDuctile, impact-resistant partsToughest nylon, thin featuresStiff, strong, lightweight compositesFlexible, skin-safe elastomer
Tensile strength49 MPa46 MPa69 MPa (X)8.7 MPa
Elongation at break40%49%9% (X)310%
Notched Izod / hardness71 J/m50 J/m74 J/mShore 90A
PrintersFuse 1+ 30W, Fuse 1Fuse 1+ 30WFuse 1+ 30WFuse 1+ 30W, Fuse 1
Bag6 kg · $69910 kg · $1,10010 kg · $1,64910 kg · $1,299

Browse all Formlabs SLS powders or the Formlabs brand page.

Specifications

Formlabs Nylon 11 CF Powder Technical Data

Compatible Printer
Fuse 1+ 30W
Print Technology
SLS
Biocompatibility
Skin contact, mucosal membrane contact
Category
Impact Resistant, High Stiffness, Temperature Resistant
Size
10 kg bag
Ultimate Tensile Strength
69 MPa (X), 52 MPa (Y), 38 MPa (Z)
Tensile Modulus
5,300 MPa (X), 2,800 MPa (Y), 1,600 MPa (Z)
Flexural Strength / Modulus
110 MPa / 4,200 MPa
Notched Izod
74 J/m
Elongation at Break
9% (X), 15% (Y), 5% (Z)
Heat Deflection Temp. @ 1.8 / 0.45 MPa
178 °C / 188 °C
SKU
PD-FS-P11C-10-01 (10 kg bag)

RESOURCES

Downloads & Technical Support

Everything you need to choose and run Formlabs Nylon 11 CF Powder with confidence.

Nylon 11 CF Powder Technical Data
Formlabs-published specifications, compatibility, and what is included.
View specifications →
SLS Powder & Post-Processing Guide
Formlabs-recommended powder handling, refresh rates, and Fuse Sift and Fuse Blast post-processing.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. Resin & SLS Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We help you choose the right Formlabs SLS powder for your parts and set up powder recovery and post-processing.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for SLS powder guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Genuine Formlabs SLS powders, Fuse consumables and post-processing — sourced and supported from the USA.
Buyer FAQ

Formlabs Nylon 11 CF Powder — questions buyers ask.

Why carbon fiber?
Carbon fiber adds stiffness and strength — up to 5,300 MPa modulus in X — while keeping parts lightweight.
Are properties the same in every direction?
No — Formlabs lists separate X, Y and Z values; orient critical loads accordingly.
Which printers can use it?
Fuse 1+ 30W.
What size is it?
A 10 kg bag.
Are there volume discounts?
Yes. Formlabs SLS powder discounts start at 20% for 50 kg bought in bulk, with prices as low as $45 per kilogram at volume. Ask Rev1 for bulk pricing.
What is it used for?
Formlabs recommends it for replacement and spare alternatives to metal parts; high-impact equipment; tooling, jigs and fixtures; functional composite prototypes.

PRINT WITH GENUINE FORMLABS RESIN

Print with Formlabs Nylon 11 CF Powder

Order Nylon 11 CF Powder, or talk to a Rev1 specialist about the right SLS powder and bulk pricing for your Fuse printer.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA US support & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.