HeyGears UltraCraft Reflex RS — 8K Resin 3D Printers
The UltraCraft Reflex RS brings HeyGears’ production hardware to a sub-$1,000 starting point: a 10.3″ 8K screen at 29.7 µm, a C5-grade ±2 µm Z-axis, 60-zone full-field screen calibration and Dynamic Motion Algorithm 3.0 for 4.5 s/layer throughput. Buy it as the RS printer, as the RS Combo (printer + matched UltraCraft Wash + Cure), or as the RS Turbo — a high-speed, amber-screen (566:1 contrast) variant that adds 33% more speed via DMA 3.0. This page compares the three.
- 10.3″ 8K · 29.7 µm
- 4.5 s/layer · DMA 3.0
- From $899
- US reseller & support
Choosing a HeyGears reflex rs machine
The decisions that actually matter for this class of machine — size them to your parts, not to a spec sheet.
Which configuration
The RS is the printer on its own; the RS Combo bundles the matched UltraCraft Wash and Cure stations into one print-wash-cure system; the RS Turbo is the fastest, with an amber screen and +33% speed from DMA 3.0.
8K resolution & speed
All run a 10.3″ 8K screen at 29.7 µm pixels and ±15 µm accuracy, with Dynamic Motion Algorithm 3.0 hitting ~4.5 s/layer — production-desktop speed without trading away accuracy.
Mono vs amber screen
The RS and RS Combo use an 8K mono screen; the RS Turbo uses an 8K Amber screen (566:1 contrast) with NFC auto-calibration, for higher contrast and faster, consistent exposure.
Production hardware
A C5-grade ballscrew Z-axis (±2 µm under load), 60-zone screen calibration (±3%), floating-screen auto-leveling and residue detection are shared across the line.
Compare the reflex rs lineup
| Specification | Reflex RS | RS Combo | RS Turbo |
|---|---|---|---|
| Best for | 8K production desktop | Complete print-wash-cure | High-speed amber 8K |
| Screen | 10.3″ 8K mono | 10.3″ 8K mono | 10.3″ 8K Amber (566:1) |
| Wavelength | 405 nm | 405 nm | 405 nm |
| Build volume | 222 × 122 × 228 mm | 222 × 122 × 228 mm | 222 × 122 × 228 mm |
| XY pixel | 29.7 µm | 29.7 µm | 29.7 µm |
| Accuracy | ±15 µm | ±15 µm | ±15 µm |
| Z-axis | C5 · ≤2 µm | C5 · ±2 µm | C5 · ±2 µm |
| Speed | 4.5 s/layer (DMA 3.0) | DMA 3.0 | 4.5 s/layer · DMA 3.0 +33% |
| Included | Printer only | + UltraCraft Wash + Cure | Printer only |
| Price | $1,707 | $1,707 | $899 |
Specs as published on each Rev1 product page. Open-material 405 nm MSLA.
HeyGears Reflex RS printers we sell & support
Built for the work you already do
Frequently asked questions
RS, RS Combo or RS Turbo?
Choose the RS Turbo ($899) for the fastest, lowest-cost 8K amber-screen machine; the RS ($1,707) for the 8K mono printer; or the RS Combo ($1,707) for the RS printer bundled with matched Wash and Cure stations. All share a 10.3″ 8K screen and DMA 3.0 speed.
How fast is the Reflex RS?
About 4.5 s/layer with Dynamic Motion Algorithm 3.0, and the RS Turbo adds a further ~33% via DMA 3.0 — production-desktop speed while holding ±15 µm accuracy with a C5-grade Z-axis.
What is the difference between the mono and amber screens?
The RS and RS Combo use a 10.3″ 8K mono screen; the RS Turbo uses an 8K Amber screen (566:1 contrast) with NFC auto-calibration for higher contrast and faster, consistent exposure.
Are they open-material?
Yes — 405 nm resins including the HeyGears UltraPrint range and other 405 nm resins. We help confirm the right resin and exposure for your application.
What support comes with it?
Rev1 is an authorized HeyGears reseller in the USA — US phone and video support, resin and configuration help, and financing. Call (248) 707-2950.
Can’t find your answer? Browse the support knowledge base for setup, calibration and troubleshooting guides, or open a support ticket.
Print your part before you buy the printer
A free sample print or a live demo — either way you leave with a real part in hand and a same-day quote. Or browse the full lineup and filter by what your parts need.
Already own HeyGears? Knowledge base & guides · Open a support ticket