Micro Swiss Wear-Resistant Heat Break for E3D v6 (3mm) E3D v6 · 3mm · TwinClad XT
Low-friction, wear-resistant TwinClad XT heat break — a direct replacement for E3D v6 3mm hotends
A genuine Micro Swiss upgrade heat break (thermal tube) for E3D v6 3mm hotends — machined from stainless steel and lined with TwinClad XT, a very-low-friction, injection-mold-grade coating that resists clogging in the critical melt-transition zone and stands up to abrasive filaments. Full specifications →
A genuine Micro Swiss direct replacement heat break for E3D v6 3mm hotends. Questions about fit or bulk pricing? Call (248) 707-2950.
Authentic Micro Swiss nozzles, made in the USA
Every heat break is a genuine Micro Swiss part — stainless steel lined with TwinClad XT and plated in Micro Swiss’s own US facility. Rev1 Technologies is your authorized Micro Swiss reseller and US support partner, Auburn Hills, Michigan.
A high-lubricity surface right where it matters.
Keeps filament moving through the melt-transition zone.
TwinClad XT is an injection-mold-grade electroless-nickel composite with excellent release properties. Lining the heat break's critical zone — where filament liquidizes — keeps flow smooth and dramatically reduces heat-creep clogs on long prints.
Genuine Micro Swiss, built to last.
Machined from stainless steel for a clean, strong thermal transition between the hot and cold zones of your hotend — a precise, direct-fit replacement.
The filament path is lined with TwinClad XT — a very-low-friction, injection-mold-grade electroless-nickel composite coating with excellent release properties.
A genuine Micro Swiss part, machined and plated in the USA — a direct drop-in replacement for the E3D v6 heat break, never grey-market.
Stainless steel, plated hard — a true drop-in.
Stands up to abrasives; replaces the E3D v6 heat break exactly.
Machined from stainless steel and plated hard, this heat break resists the abrasion of carbon-fiber, glass-fiber and metal-filled filaments that scour a bare tube — and it drops straight into E3D v6 3mm hotends with no modification.
Fewer clogs, cleaner melting, abrasive-ready.
The high-lubricity TwinClad XT lining keeps filament moving smoothly through the heat break's critical melt-transition zone — far fewer heat-creep jams on long prints.
The hard, wear-resistant coating stands up to carbon-fiber, glass-fiber and metal-filled filaments that scour and wear out a bare steel heat break.
A sharp hot/cold thermal transition gives more consistent melting and crisper retractions — better surface quality and less stringing.
Wear-Resistant Heat Break for E3D v6 (3mm) Specifications
WHY REV1 TECH
Authorized Micro Swiss Reseller. Additive & Maker-Supply Specialists.
Rev1 Technologies is an authorized Micro Swiss reseller headquartered in Auburn Hills, MI, with hands-on expertise in industrial FFF, resin, scanning, and the supplies that keep them running.
Wear-Resistant Heat Break for E3D v6 (3mm) — Questions
Will it fit my hotend?
It is a direct replacement for the heat break (thermal tube) in E3D v6 3mm hotends and the printers that use them. Not sure which hotend you have? Call us and we’ll confirm before you buy.
What does the TwinClad XT lining do?
TwinClad XT is a very-low-friction, high-lubricity electroless-nickel composite coating. In the heat break’s critical melt-transition zone it keeps filament moving smoothly — far fewer heat-creep jams — and it is hard enough to resist abrasive filaments.
Is it better than the stock steel heat break?
Yes — a bare steel heat break relies on a PTFE liner that degrades, or runs rougher all-metal. The TwinClad XT lining gives all-metal temperature capability with low friction, so you get fewer clogs and better reliability, especially with filled filaments.
Is it a genuine Micro Swiss part?
Yes — every part is authentic Micro Swiss, sourced direct and stocked in Michigan. No grey-market, no counterfeit components. Rev1 Technologies is an authorized Micro Swiss reseller.
Do you offer bulk or trade pricing?
Yes — case pricing and scheduled standing orders for shops, schools and print farms, quoted within one business day. Call (248) 707-2950 or use “Get Bulk Pricing” above.
How fast do you ship?
We stock genuine Micro Swiss nozzles in Michigan and ship fast — no overseas lead times or customs surprises. Need it urgently or in volume? Call (248) 707-2950 and we’ll sort it out.