KUKA KMP 3000P Three tons. Any direction. Around the clock.
Omnidirectional heavy-load AMR with inductive charging for 24/7 intralogistics
The KUKA KMP 3000P is an autonomous mobile platform built for the heavyweights of intralogistics. It carries up to 3,000 kg, moves omnidirectionally on powered swivel castors, navigates by SLAM or floor QR codes, and charges inductively — at central stations or right at the workstation — so it can stay in service 24/7. Integrated 3D cameras and laser scanners let it work safely alongside people. Full specifications →
Rev1 validates payload, route layout, floor conditions and fleet size with you before purchase. Authorized KUKA partner for autonomous mobile robotics in the USA — call (248) 707-2950.
German-Engineered Mobility. US-Supported by Rev1.
The KMP 3000P is designed and built by KUKA, one of the world’s leading robotics and automation companies. Rev1 Technologies handles application review, site survey, fleet sizing and integration planning for US customers.


WHAT IT DOES
The Transport Platform for the Heavyweights of Intralogistics
Most autonomous mobile robots top out at a few hundred kilograms. The KMP 3000P is built for the loads that usually need a forklift, a crane or a fixed conveyor — up to three tonnes, carried autonomously through a working factory.
Up to 3,000 kg on a 370 mm Platform
The KMP 3000P has a rated payload of 3,000 kg on a platform just 370 mm tall. Its compact 2,200 × 1,200 mm footprint drives under racks and load carriers, lifts them, and moves them to where production needs them. Large, unwieldy, heavy components — the parts that tie up cranes and forklift drivers — become a routine automated move.
Material Supply, Process Linking and Point-to-Point Moves
KUKA positions the KMP 3000P for three jobs: supplying material to production lines, interlinking process steps without conveyor belts, and classic point-to-point transport. Because routes are software rather than steel, a line layout can change without ripping out fixed conveyors — and the same vehicle can serve a different task on the next shift.
DRIVE CONCEPT
Smooth Movement in Every Direction
A three-tonne load is only useful if you can place it precisely in a tight cell. The KMP 3000P’s omnidirectional drive moves forward, sideways and diagonally, and turns on the spot.
Powered Swivel Castors, Not Mecanum Rollers
KUKA’s new drive concept uses powered swivel castors that run smoothly and allow high speeds. Each of the two drive units carries two wheels, so the weight is spread over more contact points — a lower point load per wheel and less abrasion on your floor. The platform reaches 1.2 m/s unladen and 1.0 m/s with payload, and turns on the spot within a 1.3 m radius.
Built for Tight Production Environments
Sideways and diagonal travel means the KMP 3000P can slot a load into a machine bay or between columns without the multi-point turns a forklift or tugger needs. That makes it practical in brownfield plants where aisles were never planned for automated traffic. Acceleration is limited to 0.4 m/s² and braking to 0.6 m/s², keeping heavy, tall loads stable on the move.
SMART NAVIGATION
SLAM Where the Floor Changes. QR Codes Where Precision Matters.
The KMP 3000P combines two navigation methods. No induction wires, magnetic tape or floor rails are needed for the autonomous route network.
Hybrid SLAM + QR-Code Navigation
For open travel, the KMP 3000P localises with SLAM using its laser scanners, building on the natural contours of your building. At stations that need tighter placement, 3D cameras on the underside of the platform read QR codes on the floor. KUKA’s datasheet gives ±10 mm / ±1° positioning with SLAM and ±5 mm / ±0.5° with QR codes. An upward-facing camera reads QR codes on racks, so the platform can confirm which load it is picking up. Photo: KUKA KMP platforms in production at TPV Displays, Poland.
HIGHEST SAFETY STANDARDS
Three Tonnes That Share the Floor With People
A heavy-load AMR in a human workspace has to see in three dimensions and stop reliably. The KMP 3000P layers laser scanners, 3D cameras, emergency stops and a bumper bar around the whole vehicle.
360° Detection, Six Emergency Stops
Two laser scanners mounted at the corners detect obstacles reliably around the vehicle. Four 3D cameras, one on each side, add detection in three dimensions to protect the platform and its load as well as the people nearby. Six emergency-stop switches sit at each corner and on the sides, a bumper bar runs around the vehicle, and acoustic and visual signals announce its movements.
Corner-mounted for reliable obstacle detection and protective fields around the platform in every direction of travel.
One on each side detects obstacles in 3D — including overhanging objects a planar scanner can miss — protecting both the platform and the load.
At every corner and on the sides, plus a bumper bar around the vehicle and acoustic and visual warning signals.
Watch the KMP 3000P
Feel the Flow of Automation — KMP 3000P by KUKA
INTELLIGENT CHARGING
Charges in the Process. Ready Around the Clock.
The KMP 3000P’s inductive charging concept is what makes 24/7 operation practical: the platform tops up wherever it waits, instead of leaving the line to queue at a charger.
Wireless Charging Pads in the Floor
A charging pad on the underside of the platform couples with pads set into the floor. The KMP 3000P can charge at central charging stations or decentrally at workstations — while it waits for a load, it is already charging. Because there are no exposed contacts, the charging is wear-free, and the charger runs on a single-phase supply, so no special power installation is required.
Two Hours to Charge, Up to Eight Hours to Run
KUKA rates the KMP 3000P for up to 8 hours of operation and a 2 hour charge. When the battery runs low, the fleet manager automatically sends the platform to a free charging station, so nobody has to watch charge levels. Opportunity charging at workstations stretches that further, keeping the fleet available across shifts.
LOAD HANDLING
Drive Under, Lift, Go
The KMP 3000P is a topload platform: it drives under a rack or load carrier, lifts it with its integrated lifting device, and carries it on its deck.
Maximum Agility for Extra-Heavy Loads
KUKA’s campaign film shows the KMP 3000P carrying tall racks with long, bulky components — the kind of load that is awkward for any other material-handling method. The integrated lifting device has a 100 mm stroke, enough to raise a rack clear of the floor and set it down precisely at its destination.
Collaboration Allows Double Payload
For loads beyond a single vehicle, KUKA’s KMP 3000P film shows two platforms working together under one long load — collaboration that doubles the payload that can be moved. If your parts exceed three tonnes or extend beyond one platform’s footprint, Rev1 will review the configuration with KUKA during the application study.
A Deck Designed Around the Load
The flat top deck carries the integrated lifting device, and the upward-facing camera reads QR codes on racks to identify them. KUKA’s fleet software adds automatic rack recognition, so the system knows what each platform is carrying — useful for traceability when the same racks circulate between stations.
FLEET & INTEGRATION
KUKA.AMR Fleet: No-Code Fleet Management, VDA 5050 Open
One KMP 3000P is a transport. A fleet is a material-flow system — and that is where KUKA.AMR Fleet does the work.
Configure Routes in the Browser, Not in Code
KUKA.AMR Fleet is a no-code platform: routes and settings are configured with the cursor in a web browser, so new or changed routes can be planned quickly. It schedules jobs across the fleet, regulates all fleet traffic and automatically reschedules when obstacles appear. KUKA states that predefined configurations cover more than 90% of industrial scenarios, enabling delivery of a configured system within 48 hours. Photo: KUKA KMP fleet at TPV Displays, Poland.
The KMP 3000P speaks VDA 5050, so it can be integrated into third-party fleet-management systems and mixed fleets.
KUKA’s fleet software connects to warehouse, ERP and MES systems via its API platform, plus PLC and building systems on site.
When a move falls outside the automated routes, the platform can be driven manually — no separate tug or forklift required.
WHERE IT WORKS
Heavy Components, Real Production Floors
The KMP 3000P is designed for transport jobs too heavy, too large or too awkward for compact AMRs — while fitting into the same KUKA fleet as its smaller KMP siblings.

Moving heavy assemblies and battery modules between process steps — a use KUKA highlights for its omnidirectional heavy-load platform.

Delivering material to production lines on schedule, so operators stay at their stations. TPV Displays, Poland.

Shuttling racks between storage and production in in-house logistics. TPV Displays, Poland.

Run the KMP 3000P for heavy moves alongside compact KMP platforms for light ones, under one fleet manager.
INTELLIGENT MAINTENANCE
Modular by Design, Quick to Service
Uptime is not only about charging. KUKA designed the KMP 3000P so that its wear parts and critical components are easy to reach, making replacement quick and cost-effective.
Wheels come off from the side — no need to lift or remove the housing. Individual roller linings can be replaced as well as complete drive units.
A maintenance flap gives access for quick replacement of critical parts in just a few minutes.
The inductive charging coil is easy to dismantle, so the charging system is as serviceable as the drive.
THE KMP FAMILY
Choose the Platform by Payload
KUKA’s KMP topload family runs from 250 kg to 3,000 kg. All share KUKA.AMR Fleet and the VDA 5050 interface, so mixed fleets are managed as one system. The KMP 3000P is the heavy-load, omnidirectional member; its siblings use differential drive.
Compact differential-drive platforms for boxes, small load carriers and cramped production areas, at up to 2 m/s.
Lifts all kinds of load carriers, including pallets, with up to 10 hours of operation per charge.
Omnidirectional heavy-load platform with inductive charging for large, unwieldy components.
HOW IT COMPARES
KMP 3000P vs the KUKA KMP Family
Datasheet values from KUKA’s AMR portfolio brochure. Pick the smallest platform that carries your heaviest load with margin; mix sizes in one fleet when your loads vary.
| Platform | KMP 3000P | KMP 1500P | KMP 600P | KMP 250P |
|---|---|---|---|---|
| Rated payload | 3,000 kg | up to 1,500 kg | up to 600 kg | up to 250 kg |
| Drive | Omnidirectional | Differential | Differential | Differential |
| Dimensions (L × W × H, mm) | 2,200 × 1,200 × 370 | 1,300 × 900 × 263 | 980 × 686 × 270 | 800 × 520 × 300 |
| Vehicle weight | 850 kg | 270 kg | 160 kg | 120 kg |
| Max speed | 1.2 m/s | 1.8 m/s | 2 m/s | 2 m/s |
| Lift stroke | 100 mm (integrated) | 60 mm (optional) | 80 mm (optional) | 60 mm (optional) |
| Operating time / charge | up to 8 h / 2 h | up to 10 h / 2 h | up to 8 h / 2 h | up to 8 h / 2 h |
| Positioning (SLAM / QR) | ±10 mm / ±5 mm | ±10 mm | ±10 mm | ±10 mm / ±5 mm |
| Pricing | Request a quote | Request a quote | Request a quote | Request a quote |
KUKA KMP 3000P Technical Data
RESOURCES
Downloads & Technical Support
Everything you need to plan, size and run a KUKA KMP 3000P fleet with confidence.
WHY REV1 TECH
Authorized KUKA Partner. Automation & Integration Specialists.
Rev1 Technologies is headquartered in Auburn Hills, MI, supporting US manufacturers across industrial automation, 3D scanning and additive manufacturing.
QUESTIONS
KUKA KMP 3000P FAQ
The questions buyers ask most before specifying a heavy-load autonomous mobile robot.
READY TO AUTOMATE
Plan Your KUKA KMP 3000P Deployment With Rev1
Authorized KUKA Partner — Auburn Hills, MI — (248) 707-2950