LARGE-FORMAT SLS PRODUCTION CELL • FORMLABS • REV1 TECH

Formlabs Fuse X1 Basic The Complete SLS Workflow

Fuse X1 with Fuse Sift X1, Mix Kit X1, Fuse Blast, and the powder handling to run it end to end.

Formlabs Fuse X1 ecosystem: printer, Fuse Sift X1, and Fuse Blast

The Formlabs Fuse X1 Basic Package is the full Fuse X1 workflow in one order: the Fuse X1 printer and Build Unit, two Vacuum Conveyors, Fuse Sift X1 for powder recovery, Mix Kit X1 for blending fresh and reclaimed powder, Fuse Blast with a Large Tumbler Basket for automated cleaning, and the Industrial Vacuum the Sift requires. Parts go from printed to cleaned without manual brushing. Full specifications →

330×330×565Build Volume (mm)
61.5 LPrint Volume
120 WFiber Laser
1.3 m²Footprint
Print Engine
120 W Ytterbium Fiber LaserNitrogen Environment13 Thermal Zones
Intelligence
AI Print IntelligenceAdaptive Thermal ControlDynamic Dosing
Materials
Nylon 12Nylon 11*Nylon 12 GF*TPU 90A*Open Material Mode
Pricing
Quoted by Rev1 · includes site planning, installation & training

Rev1 quotes every Fuse X1 configuration with site planning, nitrogen and power requirements, installation, and operator training — call (248) 707-2950. *Formlabs lists Nylon 11 for Q1 2027 and Nylon 12 GF / TPU 90A for Q2 2027.

Formlabs Fuse X1 ecosystem: printer, Fuse Sift X1, and Fuse Blast
Rev1 Technologies · Authorized Formlabs Partner

Factory-Built Precision. US-Supported by Rev1.

Fuse X1 is built and supported by Formlabs, with Production Service plans available. Rev1 adds application review, site planning, installation, operator training, and US-based support from our Auburn Hills, Michigan team.

Authorized Formlabs Reseller Site Planning & Installation US Stock, Parts & Training
Formlabs — official manufacturer of the Fuse X1
FormlabsOfficial Manufacturer
Rev1 Technologies — authorized Formlabs reseller, Auburn Hills MI
Rev1 TechnologiesAuthorized Reseller
Why Choose the Fuse X1

Industrial SLS, without the industrial infrastructure.

Fuse X1 brings production-scale selective laser sintering to shops that could not justify a traditional industrial system: a fraction of the cost, less than half the floor space, and a workflow that installs in about an hour.

Build Big
330 × 330 × 565 mm build volume — 7.5× larger than Fuse 1+ 30W — with 30%+ packing density for full-size parts overnight or full production runs.
Low Part Cost
Formlabs reports production-quality parts for 50% less than competing SLS and outsourcing, with bulk powder pricing as low as $45/kg.
Productive
Same-day large parts and 3× the throughput of competitors, according to Formlabs; print-to-print changeover takes minutes.
Reliable
AI-powered Print Intelligence combines computer vision with Adaptive Thermal Control to detect anomalies and mask affected areas in real time.
Intuitive
Install and operate in about an hour and start a print in five minutes, with the same PreForm software as Formlabs SLA printers.
Fits Where Others Can’t
At 1.3 m², Fuse X1 takes less than half the floor space of an HP 5600 or EOS P3 Next and rolls through a standard doorway.
Proven in Production

How teams use Fuse X1.

Quotes are from Formlabs’ published Fuse X1 case studies.

Radio Flyer engineers with a 3D printed cargo e-bike prototype
Radio Flyer — 90% Shorter Prototyping
“With Fuse X1, we can now print an entire Flyer Loop cargo ebike overnight and be gluing it together the next day.” — Agostino LoBello, Product Development Engineer
Autotiv Manufacturing service bureau running Fuse X1 printers
Autotiv Manufacturing — 3× Throughput
“The Fuse X1 has returned on investment about five times faster than comparable SLS systems…” — Evan LaBelle, CEO
Tesla Giga Nevada additive lab with SLS printed parts
Tesla Giga Nevada — 20,000 Parts/Month
“Fuse X1 has completely changed our perspective on what kinds of projects our lab can support versus what we would have traditionally moved to an injection mold.” — Cody Jepson
Build Volume

Deliver full-size parts overnight, or production runs of your latest design.

7.5× Fuse 1+ 30W

330 × 330 × 565 mm, 61.5 liters

Fuse X1’s build volume is 7.5× that of Fuse 1+ 30W (165 × 165 × 300 mm). With no support structures in SLS, parts nest throughout the whole volume, so one build can be a single full-scale prototype or thousands of production parts.

61.5 LFuse X1
8.2 LFuse 1+ 30W
30%+Packing density
PreForm render of a Fuse X1 build packed with 3,280 small production parts
Production Batch — 3,280 Parts
41.5 hours at 41% mass packing density, per Formlabs.
PreForm render of a Fuse X1 build with 29 mixed parts
High-Mix Build — 29 Parts
22.5 hours at 10% mass packing density.
PreForm render of a Fuse X1 build with three full-scale prototype parts
Full-Scale Prototypes — 3 Parts
21 hours at 2% mass packing density.
Cost per Part

Scale production, not overhead, with 50% lower cost per part.

Formlabs’ published comparisons of Fuse X1 against outsourcing and legacy SLS, per part and lead time.

Large SLS printed e-bike frame section on a workbench beside Fuse X1

E-bike frame: $990 per frame, 3-day lead time

A full e-bike frame, one per build, costs $990 on Fuse X1 with a three-day lead time — versus $3,623 outsourced (14 days) and $3,010 on legacy SLS (5 days).

$990Fuse X1
$3,623Outsourced
$3,010Legacy SLS
Batch of black SLS printed drone frames laid out on a table
Drone Frame — $59
20 per build; $239 outsourced, $115 legacy SLS; 2-day lead time on Fuse X1.
Full-size SLS printed car door panel on a workbench
Car Door — $792
1 per build; $1,853 outsourced, $1,307 legacy SLS; 3-day lead time.
Bin of SLS printed mixer latches from a Fuse X1 build
Mixer Latch — $0.50
3,280 per build; $22 outsourced, $1.56 legacy SLS; 5-day lead time.
Throughput

Productive no matter how you measure it.

Formlabs reports 3× higher throughput than competing industrial SLS and MJF systems in less than half the floor space.

Graphic comparing parts per build for Fuse X1 against competing SLS systems

More parts per build

With 30%+ packing density and a 61.5 L build volume, Fuse X1 fits more parts in a single build than competing industrial SLS and MJF systems — thousands more parts per week.

30%+ packing densityNo supportsThousands of parts/week
Graphic showing the Fuse X1 1.3 square meter footprint

Fits where others can’t

At 1.3 m², Fuse X1 takes less than half the floor space of an HP 5600 (2.80 m²) or EOS P3 Next (2.70 m²), and it rolls through a standard doorway — no rebuilding your floor plan.

1.3 m²Fuse X1
2.80 m²HP 5600
2.70 m²EOS P3 Next
Production room with several Fuse X1 printers and Fuse Sift X1 stations

Scale your fleet as demand grows

Add printers one at a time. Formlabs states each additional Fuse X1 costs 3–5× less than other SLS and MJF printers, and low labor, minimal powder waste, and bulk powder pricing keep cost per part down as volume rises.

Start with one printerAdd units on demandBulk powder from $45/kg
Evaluating industrial SLS?
Get a Fuse X1 cost-per-part analysis
Send Rev1 your parts and volumes — we model packing, cost per part, and lead time on Fuse X1 against your current process.
Print Intelligence

An industry-first, AI-powered print failure prevention system.

Formlabs calls Fuse X1 the most reliable SLS printer it has developed. These are the systems behind it.

Print Intelligence

Detect anomalies and mask them in real time

Computer vision combined with Adaptive Thermal Control detects anomalies as they happen and automatically masks the affected area, preventing print failures and maximizing part yield without sacrificing the rest of the build.

Computer visionReal-time maskingHigher part yield
Adaptive Thermal Control

13 independent thermal zones

Thermal imaging collects and processes 700× more data per second than Fuse 1+ 30W, driving 13 independent thermal zones that hold powder at a precise, stable temperature from first layer to last — for packing freedom and consistent part quality.

700×More thermal data
13Thermal zones
Print Engine

A 120 W ytterbium fiber laser

A 120 W ytterbium fiber laser sinters each layer in a nitrogen environment, with Dynamic Dosing delivering the right amount of powder for every layer.

120 W fiber laserNitrogenDynamic Dosing
Insulated Build Unit

Cool outside the printer, start the next print

The wheeled, insulated Build Unit carries the print between Fuse X1 and Fuse Sift X1 with blind-mate power and data connectors; the print cools passively outside the printer so the next job can start with minimal downtime.

Wheeled & mobileBlind-mate connectorsPassive cooling
Workflow

An industrial workflow anyone can run.

Install in an hour, start a print in five minutes.

1 · Prepare
Set up parts in PreForm and organize entire jobs across builds, materials, and printers in a single project file.
2 · Print
Quick-connect build chambers, automated powder loading, and no optics cleaning between prints. Hit print and walk away.
3 · Unpack
Move the build chamber into Fuse Sift X1, where an integrated glovebox and compressed air make breakout fast, clean, and contained.
4 · Clean & Polish
Automated cleaning and polishing in Fuse Blast, with a 50% larger basket for bigger parts.
5 · Refresh & Load Powder

Powder handling without the mess

The Vacuum Transport System loads used and new powder into Mix Kit X1 and refreshes the material for the next print, making loading as easy as printing.

Vacuum transportMix Kit X1Minimal waste
Watch the Video

Fuse X1, Formlabs’ largest SLS printer

Formlabs’ official launch video walks through the Fuse X1 printer, Build Unit, Fuse Sift X1, and the end-to-end SLS workflow.

Materials

Performance end-use thermoplastics, now at 50% lower part cost.

Formlabs powders start at $99/kg with bulk discounts, and bulk pricing goes as low as $45/kg. Formlabs lists Nylon 11 for Q1 2027 and Nylon 12 GF and TPU 90A for Q2 2027 on Fuse X1.

NYLON 12
Nylon 12 Powder
The versatile go-to SLS powder, with superior dimensional accuracy and detail for functional prototypes and end-use parts.
Available now
NYLON 11
Nylon 11 Powder
Ductile, impact-resistant nylon for parts that flex and take repeated stress, such as this insole.
Q1 2027 on Fuse X1
NYLON 12 GF
Nylon 12 GF Powder
Glass-filled nylon for stiff, thermally stable parts such as this intake manifold.
Q2 2027 on Fuse X1
TPU 90A
TPU 90A Powder
A flexible, rubber-like elastomer for ducts, seals, and protective parts.
Q2 2027 on Fuse X1
OPEN
Open Material Mode
Print any 1064 nm powder with Open Material Mode for research and specialty applications.
Any 1064 nm powder
Formlabs Nylon 12 Powder 10 kg bag
SUPPLY
Nylon 12 Powder 10 kg
Formlabs powder in 10 kg bags; Rev1 supplies powder with bulk pricing for production volumes.
From $99/kg
Post-Processing

Fuse Sift X1 and Fuse Blast: from printed to polished in as little as 15 minutes.

Fuse Sift X1

Powder recovery, reimagined

Fuse Sift X1 holds 3 to 5 full builds of used powder. An integrated powder transport system moves used powder to Mix Kit X1 automatically, a compressed-air gun recovers powder from parts in seconds, the sealed glovebox keeps the workspace clean, and a parts hatch sends broken-out parts straight to a transfer bin.

3–5 builds capacityCompressed-air breakoutSealed gloveboxParts hatch
Fuse Blast

Finished parts in 15 minutes

Fuse Blast delivers fully automated cleaning and polishing. An in-line ionizer keeps dust and media from re-settling, and the Polishing System produces a smooth, semi-gloss, dye-ready finish; versatile manual modes handle special parts.

Automated cleaningSemi-gloss polishDye-readyManual modes
Formlabs Mix Kit X1 automated powder blending system

Mix Kit X1

An automated blending system for fresh and reclaimed powder, so every build starts with a consistent, refreshed mix and minimal material waste.

Automated blendingFresh + reclaimed powder
Configurations

Three ways to buy Fuse X1, each quoted by Rev1.

Each option has its own page, just as on Formlabs’ store — switch with the Package selector above. Formlabs recommends two Build Units for minimal downtime, and Production Service plans of 1, 3, or 5 years are available.

Operator standing beside a Formlabs Fuse X1 printer
PRINTER · QUOTE
Fuse X1
Fuse X1 Printer & Build Unit, Vacuum Conveyor, and Wi-Fi Adapter — for shops adding a printer to an existing Fuse X1 ecosystem.
SKU PKG-FSX1-PC-01
View the Printer option →
Formlabs Fuse Blast automated cleaning station included in the Basic Package
BASIC · QUOTE
Fuse X1 Basic Package
Printer and Build Unit, two Vacuum Conveyors, Fuse Sift X1, Mix Kit X1, Fuse Blast with Large Tumbler Basket and liner kit, and the Industrial Vacuum.
SKU PKG-FSX1-BASIC-120V
You are viewing this option
Fuse Blast Large Tumbler Basket included in the packages
RECOMMENDED · QUOTE
Fuse X1 Recommended Package
Everything in Basic plus a second Build Unit, a third Vacuum Conveyor, and the Fuse Blast Polishing Module with agent, media, and mesh.
SKU PKG-FSX1-COMPLETE-120V
View the Recommended option →
In the Box

The Fuse X1 Basic Package includes:

Fuse X1 Printer & Build UnitFuse X1 Vacuum Conveyor × 2Fuse X1 Wi-Fi AdapterFuse Sift X1 (120 V)Mix Kit X1Fuse BlastFuse Blast Large Tumbler BasketFuse Blast Large Tumbler Basket Liner KitIndustrial Vacuum (110 V)
Compare

Fuse X1 vs. Fuse 1+ 30W.

Both are Formlabs SLS printers. Figures are from Formlabs’ published Fuse series comparison.

CapabilityFormlabs Fuse X1Formlabs Fuse 1+ 30W
ClassHigh-performance industrialHigh-performance benchtop
Laser120 W fiber laser30 W fiber laser
Build volume330 × 330 × 565 mm (61.5 L)165 × 165 × 300 mm (8.2 L)
Throughput0.330 kg/hr0.063 kg/hr
Footprint1.3 m² (12.2 sq ft)0.4 m² (4.8 sq ft)
Print environmentNitrogenAir and nitrogen
MaterialsNylon 12; Nylon 11, Nylon 12 GF, TPU 90A coming; Open Material ModeNylon 12, 12 Tough, 12 White, 11, 12 GF, 11 CF, TPU 90A; Open Material Mode
At Rev1QuoteQuote

For smaller SLS jobs and the widest powder range today, ask Rev1 about Fuse 1+ 30W. For resin parts, see the Formlabs Form 4L or browse all 3D printers and Rev1’s industrial 3D printer range.

Planning a production SLS cell?
Configure Fuse X1 for your facility
Tell us your parts, volumes, and space — Rev1 confirms the right option, Build Units, post-processing, and nitrogen and power requirements.
Specifications

Formlabs Fuse X1 Technical Data

Print Technology
Selective Laser Sintering (SLS)
Laser
Ytterbium fiber, 120 W
Build Volume (W×D×H)
330 × 330 × 565 mm (13.0 × 13.0 × 22.2 in) · 61.5 L
Print Environment
Nitrogen
Throughput
0.330 kg/hr
Packing Density
30%+
Footprint
1.3 m² (12.2 sq ft)
Materials
Nylon 12; Nylon 11 (Q1 2027), Nylon 12 GF & TPU 90A (Q2 2027)
Open Material Mode
Available (any 1064 nm powder)
Software
PreForm, Dashboard, Formlabs Mobile App
Setup
About one hour; print-to-print changeover in minutes
Package SKU
PKG-FSX1-BASIC-120V

RESOURCES

Downloads & Technical Support

Everything you need to evaluate and run Formlabs Fuse X1 with confidence.

Fuse X1 Technical Data
Formlabs-published build volume, laser, throughput, footprint, materials, and package contents.
View specifications →
SLS Powder & Workflow Guide
Powder technical data sheets, packing guidance, and Fuse Sift X1 / Fuse Blast workflow for Fuse X1.
Rev1 Technical Support
Application review, sample prints, and post-sales engineering guidance from Rev1 Technologies.

WHY REV1 TECH

Authorized Formlabs Reseller. SLS & Resin Production Specialists.

Rev1 Technologies is headquartered in Auburn Hills, MI, with direct expertise in production resin workflows.

YOUR REV1 PARTNER
AUTHORIZED FORMLABS RESELLER
01
Application Engineering
We review your parts, packing, and volumes and recommend the right Fuse X1 option before your printer arrives.
02
Onboarding & Training
Rev1 handles setup and operator training on PreForm, Dashboard, and the print-to-post workflow.
03
Ongoing Support
Direct access to Rev1’s technical team for resin guidance, troubleshooting, and maintenance.
04
Free Sample Print
Send us your STL. We’ll arrange a Formlabs SLS sample part and ship it to you — or get an instant print quote.
05
In-Person Demo
Visit our Auburn Hills facility or schedule a demo at your site.
06
Consumables & Parts
Formlabs SLS powders, Build Units, and post-processing consumables — sourced and supported from the USA.
Buyer FAQ

Formlabs Fuse X1 — questions buyers ask.

What is the Fuse X1?
Formlabs’ large-format industrial SLS 3D printer: a 120 W fiber laser, a 330 × 330 × 565 mm (61.5 L) build volume, a nitrogen print environment, and AI-powered Print Intelligence failure prevention.
How much more can it print than Fuse 1+ 30W?
The build volume is 7.5× larger, and Formlabs lists throughput of 0.330 kg/hr versus 0.063 kg/hr for Fuse 1+ 30W.
What does Print Intelligence do?
It combines computer vision with Adaptive Thermal Control to detect anomalies during a print and automatically mask the affected area, so the rest of the build continues.
How much space does it need?
The printer footprint is 1.3 m² (12.2 sq ft) and it rolls through a standard doorway. Rev1 plans space for the full ecosystem, nitrogen, and power with you.
Which materials are available?
Nylon 12 today. Formlabs lists Nylon 11 for Q1 2027 and Nylon 12 GF and TPU 90A for Q2 2027 on Fuse X1, and any 1064 nm powder can run in Open Material Mode.
What is the difference between the three options?
The Printer option is the printer, Build Unit, Vacuum Conveyor, and Wi-Fi Adapter. Basic adds Fuse Sift X1, Mix Kit X1, Fuse Blast, a second Vacuum Conveyor, and the Industrial Vacuum. Recommended adds a second Build Unit, a third Vacuum Conveyor, and the Fuse Blast Polishing System.
Why is Fuse X1 quote-only at Rev1?
Every Fuse X1 configuration is a capital purchase that needs site planning, nitrogen and power requirements, installation, and training, so Rev1 quotes it with those included.
How fast is setup?
Formlabs states installation takes about an hour, a print can start in five minutes, and print-to-print changeover takes minutes with a second Build Unit.
What does a part cost?
Formlabs’ published examples include $59 per drone frame, $792 per car door, $0.50 per mixer latch, and $990 per e-bike frame on Fuse X1. Rev1 can model your own parts.

INDUSTRIAL SLS, IN-HOUSE

Bring Formlabs Fuse X1 into your facility

Talk to a Rev1 specialist about the Fuse X1 Basic Package — we’ll review your parts, model cost per part, and plan installation, with a quote within one business day.

Reply within 1 business day We validate fit — not just take orders Authorized Formlabs reseller in the USA Installation & training

Auburn Hills, Michigan's premier source for industrial 3D printers, 3D scanners, materials, and software. Serving engineers and manufacturers across North America.

Products
Company
Contact
Payment methods
AMEXApple PayGoogle PayPayPalShop PayUnionPayVISA
Pay over time

© 2026 Rev1 Technologies. All rights reserved.