Bambu Lab P1P Enclosure Kit Close In Your P1P. Unlock ABS, ASA, and Quieter Prints.
Close In Your P1P. Unlock ABS, ASA, and Quieter Prints.
The P1P ships as an open-frame machine — fast and capable, but drafty, and that limits it on warp-prone materials. This official Bambu enclosure kit closes it in completely: tempered glass door and cover plate, left/right and rear panels, plus the auxiliary and chamber fans, cable chain, and PTFE needed to run it enclosed. A sealed chamber holds heat so ABS and ASA print without warping or cracking, and it cuts noise, drafts, and odor at the same time. Full specifications →
In stock in the USA — ships from Rev1. Want help enclosing your P1P for engineering materials? Call (248) 707-2950.
Genuine Bambu Lab Kit. US Stock, Fast Shipping.
This is the authentic Bambu Lab P1P Enclosure Kit, supplied and supported by Rev1 Technologies — your authorized Bambu Lab reseller in Auburn Hills, Michigan. Not a third-party enclosure.
A Sealed Chamber Changes What You Can Print.
Materials like ABS and ASA shrink as they cool. On an open printer, drafts cool the print unevenly and it warps, cracks, or lifts off the bed. Enclosing the P1P traps the heat the printer already generates, holding the chamber warm and even — which is exactly what those materials need to print reliably. It’s the difference between fighting failed ABS prints and just running them.
Everything the Job Needs, in One Kit.
This isn’t just panels — it’s the complete conversion. Along with the tempered glass door, glass cover plate, and side and rear panels, the kit includes the auxiliary part-cooling fan, control-board fan, and chamber-temperature regulator fan, plus the cable chain, P1S toolhead cable, and 550 mm PTFE tube needed to run the printer properly once it’s sealed. No sourcing extra parts to finish the build.
The Complete Enclosure Parts List.
The kit contains the glass cover plate and front glass door, the left and right plastic panels, the rear metal panel, and the P1S-style front cover — plus the three fans that manage airflow and chamber temperature in the sealed build, the cable chain and P1S toolhead cable, and a 550 mm PTFE tube. Together they turn the open P1P frame into a fully enclosed machine.
It Encloses the P1P — It Stays a P1P.
One thing to set expectations on: enclosing the P1P gives it the enclosed hardware, but the printer’s definition in software remains P1P — it doesn’t become a P1S. You get the practical benefit (a sealed, heat-retaining chamber for ABS/ASA) without a model change. Installation is a guided process; note that some P1P side panels need two small tabs trimmed on the bottom to seat cleanly. Rev1 can walk you through the build if you’d like a hand.
Bambu P1P Enclosure Kit — Specs
WHY REV1 TECH
Authorized Bambu Lab Reseller. Additive Specialists.
Rev1 Technologies is an authorized Bambu Lab reseller in Auburn Hills, MI, supporting engineers, print farms, and makers across the USA.
We stock and support the whole Bambu ecosystem — printers, filament, and the upgrades that expand what your machine can do. Buy the enclosure kit from a team that can guide the install and match the right materials to it.
FAQ
Frequently Asked Questions
Does this turn my P1P into a P1S?
It gives your P1P the enclosed hardware — glass door, panels, and the fans and cabling a sealed chamber needs — but the printer’s definition in software stays P1P; it doesn’t become a P1S. In practice you get the main benefit that matters: a sealed, heat-retaining chamber that lets you print ABS, ASA, and other warp-prone materials reliably.
Why would I want to enclose my P1P?
Two big reasons. First, materials: ABS and ASA warp and crack on an open printer because drafts cool the print unevenly — a sealed chamber holds heat and lets them print cleanly. Second, quality of life: an enclosure noticeably reduces noise, blocks drafts that can ruin a print, and contains fumes and odor from higher-temperature materials.
What’s included in the kit?
The complete conversion: a tempered glass cover plate and front glass door, the left and right plastic panels, the rear metal panel, and the P1S-style front cover — plus the auxiliary part-cooling fan, control-board fan, and chamber-temperature regulator fan, a cable chain, a P1S toolhead cable, and a 550 mm PTFE tube. Everything needed to run the P1P enclosed is in the box.
Is it hard to install?
It’s a guided, moderate DIY job — you’ll be fitting panels, routing the cable chain, and connecting fans. One detail worth knowing up front: on some P1P units the side panels need two small tabs trimmed off the bottom to seat cleanly against the base. Bambu publishes a step-by-step guide, and Rev1 can help if you get stuck.
Which materials can I print after enclosing?
Enclosing opens up the warp-sensitive materials that struggle on an open frame — primarily ABS and ASA. You’ll still print PLA, PETG, and TPU as before (with the door open or cracked for PLA to avoid over-heating). For the best results with engineering materials, pair the enclosure with a hardened nozzle if you’re running any filled filaments.
Is this the genuine Bambu Lab enclosure?
Yes. Rev1 Technologies is an authorized Bambu Lab reseller, and this is the official Bambu Lab P1P Enclosure Kit — designed to fit the P1P exactly, with matched fans and cabling. Third-party enclosures vary in fit and don’t include the OEM fans and toolhead cabling this kit does.