Bambu Lab Reusable Spool Load Refills. Cut Plastic Waste.
Load Refills. Cut Plastic Waste.
The Bambu Lab Reusable Spool is the permanent spool at the center of Bambu’s refill system. Buy filament as a low-cost, coreless refill and load it onto this spool instead of throwing away a plastic reel with every roll — Bambu’s refill approach cuts filament packaging waste by at least 20%. It twists open and snaps shut with no tools, holds a standard 1 kg refill, and runs on any Bambu printer and the AMS just like a factory spool. Full specifications →
In stock in the USA — ships from Rev1. Questions about refills or the AMS? Call (248) 707-2950.
Genuine Bambu Lab Part. US Stock, Fast Shipping.
The Reusable Spool is an authentic Bambu Lab accessory, supplied and supported by Rev1 Technologies — your authorized Bambu Lab reseller in Auburn Hills, Michigan. Not a third-party clone.
The Spool You Keep. The Filament You Refill.
Bambu sells most of its filament two ways: as a spooled roll, or as a lower-cost refill — the same 1 kg of filament wound as a bare coil with no plastic reel. The Reusable Spool is the permanent reel those refills load onto. Buy the spool once, then keep buying refills: less plastic in the bin, less cost per roll, and the same clean feeding you expect from a factory Bambu spool.
Twist Open, Drop In a Refill, Snap Shut.
The spool twists apart into a wide half and a narrow half with no tools. Set a coreless refill into the wide half, snap the narrow half back on to capture it, and load it into your printer or AMS exactly like any other spool. The whole change takes under a minute and needs nothing but your hands.
Stop Throwing Away a Spool With Every Roll.
A standard spooled roll leaves you with an empty plastic reel every kilogram. Refills skip that reel entirely — Bambu designed its filament system around a reusable spool and reports at least 20% less plastic waste across filament consumption. Over a farm or a heavy print schedule that adds up fast, both in landfill plastic and in the price you pay per roll.
One Spool, Many Rolls.
Keep a small set of reusable spools on the shelf and rotate refills through them as you print. Refills ship as a compact coil that takes less space to store and less material to make, so you cut both the packaging you discard and the shelf space your filament stockpile eats. Buy the spool once; the savings compound with every refill after.
Durable Enough to Outlast the Filament.
This is a permanent part, not a throwaway reel, so it’s built to take repeated loading and unloading without wearing out or losing its shape. The rigid perforated body keeps the coil supported and feeding smoothly roll after roll. A separate heat-resistant version is available for users who dry filament at higher temperatures — ask Rev1 if that fits your workflow.
Works With Every Bambu Printer and the AMS.
The Reusable Spool uses standard Bambu spool geometry, so a loaded spool drops into any Bambu printer and feeds through the AMS and AMS lite exactly like a factory roll. It’s made for Bambu’s own refills; if you want to confirm which refill filaments and which of your printers it suits, Rev1 can advise before you order.
Bambu Lab Reusable Spool — Specs
WHY REV1 TECH
Authorized Bambu Lab Reseller. Additive Specialists.
Rev1 Technologies is an authorized Bambu Lab reseller in Auburn Hills, MI, supporting engineers, print farms, and manufacturers across the USA.
We stock the Bambu ecosystem and support it — from printers and filament to the refills and spools that keep production tidy and low-waste. Buy the accessory from a team that can help you set it up.
FAQ
Frequently Asked Questions
What is the Bambu Reusable Spool for?
It’s the permanent spool that Bambu’s refill filament loads onto. Instead of buying every roll on its own plastic reel, you buy the spool once and then buy lower-cost coreless refills, loading each new refill onto the same reusable spool. It reduces plastic waste and lowers your cost per roll while feeding exactly like a factory spool.
How do I load a refill onto it?
Twist the spool apart into its two halves — a wider piece and a narrower piece — with no tools. Place the coreless filament refill into the wider half, then snap the narrower half back on to hold the coil in place. Load the assembled spool into your printer or AMS as usual. The whole process takes under a minute.
Does it work with the AMS?
Yes. The Reusable Spool uses standard Bambu spool geometry, so once it’s loaded with a refill it drops into the AMS and AMS lite and feeds just like a factory-spooled roll — including RFID reading when the refill carries a tag. It also works on any Bambu printer used without an AMS.
Which filament refills fit it?
It’s made for Bambu Lab’s own filament refills — the coreless 1 kg rolls Bambu sells across materials like PLA and PETG. If you’re not sure which of your filaments are available as refills, or want to move your lineup over to refills, Rev1 can advise on what fits your printers and workflow.
What’s the difference between the standard and heat-resistant spool?
Both hold refills the same way; the heat-resistant version is built to tolerate higher temperatures, which matters if you dry filament on the spool at elevated temperatures or run it in a warm environment. For most users the standard Reusable Spool is the right choice. The heat-resistant version is a separate product — ask Rev1 if your drying or storage setup calls for it.
How much waste does it actually save?
Bambu built its filament system around a reusable spool and reports at least 20% less plastic waste across filament consumption when you use refills instead of buying a new spooled roll every time. The exact savings depend on how many rolls you go through, but every refill you load onto an existing spool is one plastic reel that never gets made or thrown away.