Bambu Lab High-Temperature Reusable Spool A Reusable Spool That Survives the Dryer.
A Reusable Spool That Survives the Dryer.
Bambu’s refill filaments ship without a spool to cut waste — you load them onto a reusable one. This is the high-temperature version, molded from ABS+PC with heat resistance to 90°C, so unlike a standard spool it can go straight into a filament dryer without deforming. That matters for the engineering filaments that need aggressive drying — nylon, PA-CF, PC, PET-CF and more. Twist it open, drop in a refill, and reuse it indefinitely. Full specifications →
In stock in the USA — ships from Rev1. Running engineering filaments that need drying? Call (248) 707-2950.
Genuine Bambu Lab Part. US Stock, Fast Shipping.
This is an authentic Bambu Lab High-Temperature Reusable Spool, supplied and supported by Rev1 Technologies — your authorized Bambu Lab reseller in Auburn Hills, Michigan. Not a third-party clone.
Twist Open. Drop In a Refill. Repeat Forever.
The spool splits into a wide half and a narrow half with a simple twist. Set a Bambu refill onto the core, twist the halves back together, and you’re loaded — then unload the empty and do it again with the next refill. One spool serves for hundreds of refills, which is the whole point of Bambu’s spool-free refill system: far less plastic waste than a fresh spool with every kilogram.
The Waste-Cutting Half of the Refill System.
Bambu refills cost less and ship lighter precisely because they leave the spool out — but that only works if you have a durable spool to reuse. This one is built for exactly that: robust ABS+PC construction that stands up to countless open-and-close cycles, and the standard Bambu geometry with the RFID window so the AMS still reads the refill’s material profile.
Built to Go in the Dryer, Loaded.
A standard reusable spool is fine for PLA, but the engineering filaments that need serious drying — nylon and its composites, PC, PET-CF — are dried at temperatures a normal spool can soften or warp at. This spool is molded from ABS+PC rated to 90°C, so you can dry the filament on the spool without it deforming. That’s the difference: a spool you can leave loaded through a long, hot dry cycle and trust to hold its shape.
From PLA to Carbon-Filled Nylon.
Because it survives high-temperature drying, this spool suits the full Bambu material range — everyday PLA, PETG, ABS, and TPU, right through to the moisture-sensitive engineering filaments where drying matters most: PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, and PC. If you print composites or nylons, this is the spool to standardize on so any refill can go straight from dryer to printer.
Bambu High-Temperature Reusable Spool — Specs
WHY REV1 TECH
Authorized Bambu Lab Reseller. Additive Specialists.
Rev1 Technologies is an authorized Bambu Lab reseller in Auburn Hills, MI, supporting engineers, print farms, and makers across the USA.
We stock and support the whole Bambu ecosystem — printers, filament, refills, and the reusable spools that make the refill system work. Buy the spool from a team that can pair it with the right filaments for your jobs.
FAQ
Frequently Asked Questions
How is this different from the standard Reusable Spool?
Both are twist-open spools you load Bambu refills onto, but this one is molded from ABS+PC with heat resistance up to 90°C. That lets you dry filament while it’s still on the spool without the spool softening or warping — important for the engineering filaments that need hot, long dry cycles. The standard spool is fine for PLA and everyday materials; choose the high-temperature spool if you print nylons, composites, or PC that you dry regularly.
Can I put it in a filament dryer with filament loaded?
Yes — that’s exactly what it’s designed for. Its ABS+PC construction resists heat up to 90°C, which covers the drying temperatures used for moisture-sensitive engineering filaments. Always follow the specific filament’s recommended drying temperature and time; the spool is built to tolerate that heat while holding its shape.
How do I load a refill?
Twist the spool open into its two halves — a wide piece and a narrow piece — set a Bambu refill onto the core, then twist the halves back together. The refill is held securely and the RFID tag lines up with the spool’s window so the AMS reads the material profile automatically. When the refill runs out, twist open, remove the empty core, and load the next one.
Which filaments can I use it with?
The full Bambu range: PLA, PETG, ABS, ASA, and TPU for everyday work, plus the engineering and composite filaments where it really earns its keep — PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, and PC. Any Bambu refill fits the standard spool geometry.
Does it work with the AMS?
Yes. It uses the standard Bambu spool geometry with the RFID window, so a loaded refill is read by the AMS just like a factory spool, and the spool feeds normally through the AMS and buffer. It’s a genuine Bambu part designed to be a drop-in part of the ecosystem.
Is this a genuine Bambu Lab spool?
Yes. Rev1 Technologies is an authorized Bambu Lab reseller, and this is a genuine Bambu Lab High-Temperature Reusable Spool — correct geometry, correct RFID window, and the ABS+PC construction rated for drying. Generic spools may not hold shape at drying temperatures or seat correctly in the AMS.