Bambu Lab Cool Plate SuperTack Ultra-Strong PLA Adhesion — With Barely Any Bed Heat.
Ultra-Strong PLA Adhesion — With Barely Any Bed Heat.
The Bambu Cool Plate SuperTack solves the two most common first-layer headaches at once: weak adhesion and warping. Its SuperTack coating grips PLA (and PETG) with exceptional strength — at a very low heatbed temperature, and without glue or constant cleaning. That low-heat grip drastically cuts warping on large, flat parts, and the coating is durable: Bambu measures under 20% adhesion loss after 300 print runs. When a part won’t stay stuck or keeps lifting at the corners, this is the plate. Full specifications →
In stock in the USA — ships from Rev1. Not sure which plate size fits your printer? Call (248) 707-2950.
Genuine Bambu Lab Plate. US Stock, Fast Shipping.
The Cool Plate SuperTack is an authentic Bambu Lab accessory, supplied and supported by Rev1 Technologies — your authorized Bambu Lab reseller in Auburn Hills, Michigan. Not a third-party clone.
Parts Stay Down. Corners Stay Flat.
The SuperTack coating is built for one job: holding the first layer down hard so prints don’t shift, release early, or curl at the corners. That grip is what tames warping on big, flat footprints — the parts most likely to lift — and it does it without a glue stick or tape. Fewer failed prints, less babysitting, and large parts that come out flat.
Grip Without Glue or Cleaning.
SuperTack delivers strong hold straight out of the box — no glue stick, no wiping the plate down between prints. That’s a real time-saver on a busy printer or a farm, and it removes a common source of first-layer inconsistency. When the print is done and the plate cools, the flexible spring-steel body lets the part pop free with a simple flex.
Strong Grip at a Very Low Bed Temperature.
Most plates rely on bed heat to make filament stick. The Cool Plate SuperTack barely needs it — the coating grips at an extremely low heatbed temperature. That has two upsides: the bed reaches temperature and finishes faster (less energy, less waiting), and low, even bed heat means less thermal stress driving warp on large parts. It’s grip and flatness without cranking the heat.
Built for PLA and PETG. Built to Last.
The Cool Plate SuperTack is optimized for PLA and also handles PETG — the everyday materials most prints use. And it holds up: Bambu measures under 20% loss of adhesion strength after 300 print runs, so the grip you get on print one is close to the grip you get hundreds of prints later. For a high-throughput printer, that consistency is as valuable as the initial adhesion.
Match the Plate Size to Your Printer.
The Cool Plate SuperTack comes in the standard Bambu plate footprints — 256 × 256 mm for X1, P1, and A1 machines, and 180 × 180 mm for the A1 mini. As with any build plate, the one thing that matters is matching the size to your printer. Tell Rev1 your exact machine and we’ll confirm the right plate before you order.
Bambu Cool Plate SuperTack — Specs
WHY REV1 TECH
Authorized Bambu Lab Reseller. Additive Specialists.
Rev1 Technologies is an authorized Bambu Lab reseller in Auburn Hills, MI, supporting engineers, print farms, and makers across the USA.
We stock and support the whole Bambu ecosystem — printers, filament, plates, and the accessories that keep them running. Buy the plate from a team that can match the size and surface to your machine and your materials.
FAQ
Frequently Asked Questions
What makes the Cool Plate SuperTack different?
Its SuperTack coating grips PLA (and PETG) with unusually strong hold at a very low heatbed temperature — no glue stick or tape needed. That combination gives you reliable first layers, far less warping on large flat parts, and faster bed heat-up. It’s the plate to reach for when parts keep lifting at the corners or won’t stay stuck.
Do I need glue or tape with it?
No. The whole point of SuperTack is strong adhesion without any preparation — no glue stick, no painter’s tape, and no wiping the plate down between prints. That removes a common source of first-layer inconsistency and saves time on busy printers. Just keep the surface free of grease from fingers, as with any build plate.
Why is it called a “Cool” plate?
Because it grips at a very low heatbed temperature — it barely needs bed heat to hold a part down. That makes the bed reach temperature faster and use less energy, and the low, even heat means less thermal stress that would otherwise cause large parts to warp. “Cool” refers to the low bed temperature it works at, not the plate’s surface during a print.
How long does the adhesion last?
Bambu measures under 20% loss of adhesion strength after 300 print runs, so the grip stays strong well into the plate’s service life. As with any coated plate, keeping the surface clean of oils and following the recommended low bed temperature will get you the most consistent results over the longest span.
Which printers and sizes are available?
The Cool Plate SuperTack comes in the standard 256 × 256 mm footprint for Bambu X1, P1, and A1 printers, and a 180 × 180 mm footprint for the A1 mini. Choose the size that matches your machine. If you’re unsure, tell Rev1 your exact printer and we’ll confirm the correct plate before you order.
Is this a genuine Bambu Lab plate?
Yes. Rev1 Technologies is an authorized Bambu Lab reseller, and this is a genuine Bambu Lab accessory — not a third-party clone. Genuine plates matter for correct fitment on the magnetic bed and for the consistent, long-lasting adhesion the SuperTack coating is designed to deliver.