3DXTech ECOMAXPLA PelletsEasy-Printing Plant-Based Resin — Make Your Own Filament or Pellet-Print in Bulk
The easiest material to print — in economical bulk pellet form.
ECOMAX™ PLA is the easiest 3D-printing material to run: low print temperatures, minimal warping, crisp detail, and a plant-based, low-odor resin. Buy it as bulk pellets to extrude your own PLA filament or feed a pellet-fed printer at the lowest cost per kg. Made in the USA. Full specifications →
Made in the USA — ships from Rev1. Need a specific color, larger volume, or another pellet resin? Call (248) 707-2950.
USA-made PLA resin, in economical bulk pellet form.
3DXTech compounds ECOMAX™ PLA in Grand Rapids, Michigan. Rev1 Technologies is your authorized 3DXTech reseller and US support partner in Auburn Hills, Michigan — ask us for the current data sheet.
Make your own filament — or feed a pellet printer — with genuine 3DXTech PLA.
ECOMAX™ PLA is the easiest 3D-printing material to run: low print temperatures, minimal warping, crisp detail, and a plant-based, low-odor resin. Buy it as bulk pellets to extrude your own PLA filament or feed a pellet-fed printer at the lowest cost per kg.
From pellets to spooled filament — on your own extruder.
Full control of your material supply, at bulk pricing.
A home filament extruder turns these pellets into 1.75 or 2.85 mm PLA filament at a fraction of spooled-filament cost — ideal for high-volume printing, custom colors, or research. Pre-dry the resin, dial in your extruder, and you have a steady supply of genuine 3DXTech PLA. Prefer to skip the spool? Feed the pellets directly into a pellet-fed printer.
The easiest material to print — in economical bulk pellet form.
Full mechanical data for ECOMAX™ PLA is available from Rev1 on request.
Low temperatures, minimal warping, and reliable first layers — the most forgiving material to run.
Sharp features and clean surface finish — ideal for display and concept models.
Derived from renewable feedstock and prints with very little odor.
High stiffness holds shape well for fixtures and models at room temperature.
10 & 25 kg pails — the lowest cost per kg for high-volume PLA.
Extrude your own PLA filament or run a pellet-fed printer — your choice.
Pre-dry, then extrude — simple bulk processing.
3DXTech's guidance for turning PLA pellets into filament or feeding a pellet printer.
Dry the resin before extrusion. A dedicated dryer or toaster oven works — not the kitchen oven.
3DXTech's recommended melt range for extruding these pellets.
Wet resin extrudes with bubbles in the filament — if you see them, dry the pellets longer.
Produce 1.75 or 2.85 mm filament with a desktop filament extruder.
Feed straight into a pellet-fed 3D printer for large-format or high-throughput work.
PLA parts — at bulk volume.
Running from pellets makes high-volume production and large-format pellet printing far more economical than spooled filament.
When do pellets make sense?
These pellets are the same ECOMAX™ PLA resin as spooled PLA filament. Choose pellets for the lowest cost per kg, pellet-fed printing, or custom filament extrusion; choose spooled filament when you want to load and print with no extra equipment. Request the full data sheet for exact mechanical figures.
| PLA Pellets | Spooled PLA Filament | |
|---|---|---|
| Cost per kg | Lowest | Higher |
| Ready to print | Needs extruder / pellet printer | Load and go |
| Best volume | High / bulk | Low–medium |
| Custom filament (color / diameter) | Yes | No |
| Format | 10 kg / 25 kg pails | 1 kg spools |
Same ECOMAX™ PLA resin in both formats; request the data sheet for exact properties. Prices vary by pail size and date.
3DXTech ECOMAX™ PLA Pellets — Product & Processing Data
Product and processing data below. Full mechanical data for the PLA resin is available —
RESOURCES
Data Sheet & Processing Support
Everything you need to run ECOMAX™ PLA pellets.
WHY REV1 TECH
Authorized 3DXTech Reseller. Engineering-Materials Specialists.
Rev1 Technologies is an authorized 3DXTech reseller in Auburn Hills, MI, supplying genuine USA-made material with real support.
We help you pick the right resin and format, dial in extrusion, and keep production running.
FAQ
3DXTech PLA Pellets — Common Questions
What are PLA pellets for?
Making your own PLA filament on a home filament extruder, or feeding a pellet-fed 3D printer directly. They are also used for injection molding and materials research. Bulk pellets are the most economical way to run PLA at volume.
How do I process them?
Pre-dry at 60 °C for 4 hours, then extrude at 170–190 °C. Drying is essential — wet resin extrudes with bubbles in the filament.
Is this the same PLA as your spooled filament?
Yes — it is the same USA-made ECOMAX™ PLA resin, just in bulk pellet form. The published property data applies to both.
What sizes are available?
10 kg / 25 kg pails, in natural. Ask us about colors and larger volumes.
Where can I get the mechanical data?
The full ECOMAX™ PLA technical data sheet is available from Rev1 on request — use any “Request the TDS” button on this page.
Anything special about processing?
PLA has lower heat resistance than ABS or PETG — keep finished parts out of hot cars and direct sun.