Bambu LabSupport for PLA/PETGBambu Support for PLA/PETG — Easy-Peel Breakaway Support
Bambu Support for PLA/PETG — Easy-Peel Breakaway Support
A breakaway support-interface material tuned for PLA and PETG — supports peel away cleanly by hand, leaving smooth surfaces without dissolving or sanding. Full specifications →
In stock in the USA — ships from Rev1. Need a case quantity or a print profile? Call (248) 707-2950.
Genuine Bambu Lab Support for PLA/PETG, engineered for demanding, functional parts.
Authentic, lot-fresh Bambu Lab Support for PLA/PETG. Rev1 Technologies is your authorized Bambu Lab reseller and US support partner, Auburn Hills, Michigan.
Peel the supports off — no water, no scars.
Bambu Support for PLA/PETG is a breakaway support-interface material tuned to bond just enough to hold your model, then release cleanly. Use it as the interface layer against PLA or PETG models and the supports peel away by hand, leaving a smooth surface — faster and cheaper than dissolvable support for most parts.
Clean removal, smooth results.
Snaps and peels off — no soaking required.
As an interface material, it creates a clean separation between support and model, so supports come away easily and leave a smooth underside. It’s the efficient everyday choice for overhangs and bridges in multi-material printing with PLA and PETG.
Four reasons it speeds up finishing.
Supports peel away by hand — no dissolving.
Leaves a clean underside on supported areas.
Faster and cheaper than water-soluble support for most parts.
Runs as a support interface in AMS multi-material printing.
Support for PLA/PETG vs. common alternatives.
Where this support fits.
Bambu Lab Support for PLA/PETG Technical Data
RESOURCES
Datasheet & Print Support
Everything you need to slice and print Bambu Support for PLA/PETG with confidence.
WHY REV1 TECH
Authorized Bambu Lab Reseller. Filament Specialists.
Rev1 Technologies is an authorized Bambu Lab reseller in Auburn Hills, MI, supplying genuine filament with US stock and real print support.
We don’t just ship spools — we help you dial in profiles and keep production running.
FAQ
Bambu Support for PLA/PETG — Common Questions
How is this different from PVA?
This is a breakaway (peel-off) support — you remove it by hand, no water needed. PVA dissolves in water and is better for complex internal geometry where you can’t reach to peel.
Does it leave a clean surface?
Yes — used as the interface layer it releases cleanly, leaving a smooth underside on supported areas.
What models does it support?
It’s tuned for PLA and PETG. Use the ABS or PA/PET support materials for those model materials.
Do I need a multi-material setup?
Yes — it runs as a second material (support) alongside your model material, e.g., with an AMS.