Your cart is empty
You may check out all the available products and buy some in the shop
Return to shop
Leaders in 3D scanning and printing. Proudly featuring CreatBot, Shining 3D, Einscan, Artec 3D, and HeyGears Resin Printers
Support for PA/PET
SKU P-S03-G1-1.75-500-SPL
Category:
SKU P-S03-G1-1.75-500-SPL
Category:
$39.99
Extra $30 off code: WINTER
Extra $30 off code: WINTER All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Share:
Product Detail
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings(Blast Drying Oven) | 80 C12h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 280 – 300 C |
| Bed Temperature (with Glue) | 80 – 110 C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.17 g/cm |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 255 C |
| Melt Index | 29.2 2.1 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Downloads
Printing Tips
Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 for 8 hours in a blast drying oven, or 90 for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.
What’s in the Box
Filament with Spool*1 & Desiccant*1
Package*1
Parameters Comparison
Learn more different filaments comparison on Bambu Filament Guide >>
| Support for PLA/PETG | Support for PLA | Support for ABS | Support for PA/PET | PVA | |
| Color | Nature | White & Black | White | Green | Clear |
| Nozzle Type | All Size / Material | All Size / Material | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm |
Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm | All Size / Material |
| Nozzle Temperature | 190 – 220 C | 220 – 230 C | 240 – 270 C | 280 – 300 C | 220 – 250 C |
| Bed Temperature | 35 – 60 C | 35 – 45 C | 80 – 100 C | 80 – 100 C | 35 – 45 C |
| Printing Speed | < 100 mm/s | < 200 mm/s | < 100 mm/s | < 100 mm/s | < 200 mm/s |
| Solubility | Water-insoluble | Water-insoluble | Water-insoluble, limonene-dissolvable | Water-insoluble | Water-dissolvable |
| Dry before Use | Optional | Optional | Optional | Required | Required |
| Dry Protection during Use | Optional | Optional | Optional | Required | Required |
| Filament Compatibility | PLA, PETG | PLA | ABS | PAHT-CF,PA6-CF,PA6-GF, PET-CF | PLA, PETG |
1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.
You may also like
1.
2.
Free Shipping
3.
14-day Return Policy
4.
Secure Payment
