Your cart is empty
You may check out all the available products and buy some in the shop
Return to shop
Leaders in 3D scanning and printing. Proudly featuring CreatBot, Shining 3D, Einscan, Artec 3D, and HeyGears Resin Printers
PLA Marble
SKU P-A07-R5-1.75-1000-SPL
Category:
$24.99
Extra $30 off code: WINTER
Extra $30 off code: WINTER Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Product Details
Product Details Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Share:
Product Detail
Bambu PLA Marble
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm |
Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
PLA Marble Hex Code Table
| Color | Hex Code | Display |
| White Marble | #F7F3F0 | |
| Red Granite | #AD4E38 |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings(Blast Drying Oven) | 55 C, 8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 – 230 C |
| Bed Temperature (with Glue) | 35 – 45 C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm |
| Vicat Softening Temperature | 57 C |
| Heat Deflection Temperature | 56 C |
| Melting Temperature | 156 C |
| Melt Index | 32.2 4.5 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 33 4 MPa |
| Breaking Elongation Rate | 6.7 0.5 % |
| Bending Modulus | 2920 180 MPa |
| Bending Strength | 75 5 MPa |
| Impact Strength | 24.0 2.5 kJ/m |
Printing Tips
Drying conditions: 55 for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What’s in the Box
Filament*1 & Desiccant*1
Package*1
You may also like
-
Sold out
-
Sold out
-
Sold out
1.
2.
Free Shipping
3.
14-day Return Policy
4.
Secure Payment
