Description
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
Display of PLA Sparkle Prints
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm |
Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
PLA Sparkle Hex Code Table
| Color | Hex Code | Display |
| Classic Gold Sparkle | #CEA629 | |
| Slate Gray Sparkle | #8E9089 | |
| Crimson Red Sparkle | #792B36 | |
| Royal Purple Sparkle | #483D8B | |
| Alpine Green Sparkle | #3F5443 | |
| Onyx Black Sparkle | #2D2B28 |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings(Blast Drying Oven) | 55 C, 8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 – 230 C |
| Bed Temperature (with Glue) | 35 – 45 C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.26 g/cm |
| Vicat Softening Temperature | 57 C |
| Heat Deflection Temperature | 55 C |
| Melting Temperature | 156 C |
| Melt Index | 34.2 3.3 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 33 3 MPa |
| Breaking Elongation Rate | 11.7 0.7 % |
| Bending Modulus | 2310 140 MPa |
| Bending Strength | 63 4 MPa |
| Impact Strength | 66.5 3.6 kJ/m |
Downloads
Printing Tips
Drying conditions: 55 for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What’s in the Box
Filament with Spool*1 & Desiccant*1
Package*1
You must be logged in to post a review.