Description
Bambu TPU for AMS
Bambu TPU for AMS redefines your TPU printing experience withenhanced performance and seamless AMS integration. Perfectly suited for vibrant multicolor projects, itopens up exciting possibilities in flexible material printing. With a Shore hardness of 68D, Bambu TPUfor AMS offers impressive toughness while minimizing stringing, delivering the ease of PLA printingalongside TPU’s signature flexibility and durability.
Seamless AMS & AMS lite Integration
Optimized for use with the AMS system, Bambu TPU for AMS enables smooth andreliable multicolor printing with flexible materials.
Tough Yet Flexible
With a Shore hardness of 68D, Bambu TPU for AMS combines exceptionaltoughness with the flexibility and durability of TPU. It’s ideal for printingdurable, impact-resistant parts like protective cases, phone covers, door stoppers,sports equipment, automotive parts, and much more!
Goodbye, TPU Stringing
Say farewell to stringing with Bambu TPU for AMS! Its specialformulation greatly minimizes the common stringing problems found in traditionalTPU, ensuring clean, crisp details in every print for a smoother and morereliable printing experience.
Blazing Fast TPU Printing
Bambu TPU for AMS delivers up to 60% faster print speedscompared to Bambu TPU 95A HF, boosting efficiency without compromisingon quality. Get more done in less time with rapid, reliable results!
| Bambu TPU for AMS | Bambu TPU 95AHF | |
| Nozzle Temperature () | 230 | 230 |
| Max Volumetric Speedmm/s | 18 | 12 |
| Printing Speed (mm/s) | Up to 238 | Up to 147 |
| Model Specimens | Diameter: 50mm Height: 100mmInfill: 40% | |
Application Tips
The elasticity of TPU prints is related to theWall Loops and Sparse InfillDensity setting. The higher the wall loops orsparse infill density, the lower the elasticity, and vice versa.
Accessory Compatibility
| Recommended | Not Recommended | |
| BuildPlate | Smooth PEI Plate, Textured PEI Plate | Cool Plate SuperTack |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm Stainless Steel Nozzle (0.4 mm) |
Hotend with Hardened Steel Nozzle 0.2 mm Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid Glue GlueStick |
/ |
| AMS & AMSlite | AMS & AMS lite | / |
TPU for AMS Hex Code Table
| Color | Hex Code | Display |
| Red | #ED0000 | |
| Yellow | #F9EF41 | |
| Blue | #5898DD | |
| Neon Green | #90FF1A | |
| White | #FFFFFF | |
| Gray | #939393 | |
| Black | #000000 |
RFID for Intelligent Printing
All printing parameters areembedded in RFID, which can be read through ourAMS (Automatic MaterialSystem).
Load andprint! No more tedious setting steps.
| Recommended Printing Settings | |
| DryingSettings(Blast DryingOven) | 70 C, 8 h |
| Printing and KeepingContainer’s Humidity | < 20% RH (Sealed,with Desiccant) |
| Nozzle Temperature | 220 – 240 C |
| Bed Temperature (withGlue) | 30 – 35 C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.26 g/cm |
| Vicat SofteningTemperature | N / A |
| Heat DeflectionTemperature | N / A |
| Melting Temperature | 183 C |
| Melt Index | 21.8 0.3 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 22.4 0.6 MPa |
| Breaking ElongationRate | 650 % |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Downloads
Printing Tips
Dry before use for higher printingquality. TPU for AMS must bedried before use and kept moisture-freeduring the printing process to preventstringing.
Drying conditions: 70 for8 hrs in a blast drying oven, or 80C to 90C for 12 hours on an X1 printer’s heatbed. For moredetails please refer to: Filament dryinginstructions on WIKI.
Storage tips: To preventthe filament from absorbing moisture, use anairtight storage container with desiccantduring printing.
What’sin the Box
Filament with Spool*1& Desiccant*1
Package*1
You must be logged in to post a review.